Top 10 trailerpartsdepot.com Competitors

boattrailerparts.com

This 12 inch Vertical Galvanized Bunk Bracket allows you to vertically mount a (2)- 6 Foot Boat Trailer Bunk Board Runner Pre-Carpeted 2 in x 4 in or 2 x 6 bunk board. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a single axle trailer would have 4 of these mounted to hold up the boat. The 1/2 inch adjustable slotted holes allow for you to fix the height of your bunks to get the right ride height for your boat. If you are needing a different height we also have available the 10 inch Vertical Bunk Bracket Galvanized and 8 inch Vertical Bunk Bracket Galvanized Ideally, you would use either Boat Trailer Bolts or Boat Trailer U-Bolts to mount these bunk brackets around your boat trailers cross-members. The cross-members are the the pieces of either galvanized channel, tubing, or aluminum tubing that connect one side of the trailer frame to the other, typically in front, and behind the trailers axle or axles. In some cases with a tandem axle trailer, there may be 3 cross-members. When mounting this 12 inch Vertical Galvanized Bunk Bracket, mount the flat side to the face of the cross-member, and the open side will face away from the cross-member. Important things to consider when replacing Vertical Bunk Brackets. 1. Desired Bunk Board Height- Do you want the same size or would you prefer a shorter, or taller height for your boat. If you are going shorter keep in mind the changing ride height of the boat puts it closer to the trailer fenders and also the motor closer to the ground. 2. Keep Track of Hardware needed to replace the bunks. These bunk brackets will mount with either 1/2 inch bolts or U-Bolts. Determine which is needed, and the appropriate measurement. Most commonly, U-Bolts fastened around the trailers cross-member, and through the slotted holes. Determine the dimension needed to go around the cross-member by measuring the height and width. Keep in mind to add ext

thetrailerpartsoutlet.com

Upgrade your trailer with our 15k trailer kits. Guarantee ship next day if ordered by noon. Explore our collection now!

trailerpartsunlimited.com

Everything You Need to Install and Haul Heavy Loads This Carter 12K Tandem Trailer Axle Kit delivers extreme strength, superior braking, and commercial-grade suspension control. Designed for heavy-haul trailers up to 24,000 lbs GVWR, this kit includes HDSS Hutch heavy-duty suspension, hydraulic disc brake axles, and four 17.5” super single tire and wheel combos—a high-capacity setup trusted by serious haulers. Every Carter axle is 100% fully interchangeable with Dexter axles and parts, so all bearings, seals, brakes, hubs, and rotors match standard Dexter part numbers for easy nationwide service and replacement.   Kit Includes (2) 12K Hydraulic Disc Brake Trailer Axles – 8x6.5" bolt pattern (4) 72-48 HDSS Hutch 3-leaf slipper springs (11,200 lb rated, 42" long, 3" wide) (2) HDSS U-Bolt Kits (3/4" dia x 12" long U-bolts with nuts) (1) Complete HDSS Hutch Tandem Suspension Kit (4) 17.5” SUPER SINGLE Trailer Tire & Wheel Combos — your choice of style and ply rating Everything arrives ready for installation—axles, suspension, U-bolts, hangers, equalizers, and wheels. Just bolt on and start hauling.   Axle Specifications Capacity: 12,000 lbs per axle Bolt Pattern: 8x6.5" Tube Diameter: 5" round Inner Bearing: 3984 Outer Bearing: 28682 Seal: 10-56 Brakes: Hydraulic Disc Brakes Studs: 5/8" Hub Diameter: 4.75" Lubrication: Oil or grease Finish: Powder coated Hub Caps: Upgraded forged aluminum oil caps Hardware: Swivel flange nuts included Spring Pads: #3-403 HDS Hutch spring pads — pre-welded or loose (your choice) Need custom spring pad spacing? We can weld them before shipping. ? Call 844-898-8687 to customize your axle.   U-Bolt & Spring Details Part #72-48: HDSS Hutch 11,200-lb 3-leaf slipper spring — 42" long x 3" wide Part #UBHDS-1175: 3/4"

ordertrailerparts.com

Burnishing Your Brakes:   At OTP. we know there is nothing more frustrating than having just installed brand new parts only for them to seem unresponsive or just not work! The good news is, Lippert Components has got you covered! Check out this nifty

trailerdepot.com

Corrosion is the direct effect of salt water, no worries this is quite normal. These brackets can easily be changed individually or as part of a kit- 4 Post Bunk Kit. While replacing these brackets is a good idea to check that your wood is not dry rotted and if reusing existing wood apply liquid nails type adhesive to lag bolt holes. This will keep the wood from coming loose as you load and unload. 

ameratrailparts.com

SHIPPING IS SENT THROUGH FEDEX/UPS. THERE IS NO FREE SHIPPING.

uboltsdirect.com

Whether you're ready to order, or just have a few questions before getting started, our team at Uboltsdirect.com is happy to answer your inquiry.

loadrite.com

Find a Load Rite dealer near you. Enter your zip code and select how many miles away then click "Find A Dealer Near You”.

sturdybuiltonline.com

GreaseCo SuperPurpose Calcium Sulfonate Wheel Bearing Grease 14 oz Tube

trailerparts.com

trailerparts.com offers great value for trailer parts, including boat trailers, plows, brakes, electrical, and more with outstanding customer service.