Noise Level & Spectrogram app analytics for December 31

"Noise Level & Spectrogram" is a sound level meter app for iPhone to easily measure the sound level of noise and music in your living environment. Just tap the start button to measure sound levels in decibels (dB) and display the time variation of the sound level. You can also visually check the frequency characteristics of the sound source in spectrogram. You can select between frequency weighting characteristics (A/C/Z) and time weighting characteristics (FAST/SLOW), which are essential for general sound level meters, for appropriate sound level measurement. The world is full of sounds. Some are pleasant, others are unpleasant and harmful. The World Health Organization (WHO) has noted a direct correlation between noise and health risks. It can cause a variety of health risks, including tinnitus, sleep disturbances, stress, cognitive impairment, and heart disease. Knowing if your noise levels are appropriate will improve your quality of life. Protect your health and comfort with this app. Features: - Sound level measurement (dB): Leq (equivalent sound level), Min (minimum value), Max (maximum value), Avg (time-averaged equivalent sound level) - Frequency weighting correction characteristics: A (general sound level measurement with auditory correction), C (sound level measurement with almost flatter correction than A correction, e.g. peak evaluation at high volume), Z (flat characteristics without auditory correction, physical sound level measurement) - Time weighting characteristics: Fast=0.125sec, Slow=1.0sec - Time course graph - Spectrogram: 1/3 octave band analysis - Measurement time: 20 sec Applications: - Environmental noise measurement - Architectural acoustics - Live sound check - Installation of audio equipment - Tuning of sound equipment - Device management Example of the noise level situation: - 130 dB: Engine sound of Airplane - 110 dB: Horn of Car - 100 dB: Noise of passing train - 90 dB: In loud factory - 80 dB: In the train, Vacuum cleaner - 70 dB: Noisy office, Noisy Street - 60 dB: Quiet Car, Normal conversation - 50 dB: Quiet office - 40 dB: In the library, Quiet residential area - 30 dB: Outskirts of midnight, Whisper - 20 dB: Sounds of rubbing leaves Note: - Spectrogram is a tool to analyze the frequency spectrum of sound, with time on the horizontal axis, frequency on the vertical axis, and the strength of the signal represented by colors, and is used for acoustic analysis, voiceprint identification, etc. - This app is adjusted the reference value for iPhone. However, the built-in microphone of your iPhone is likely to have a non-uniform gain. The more exact measurement should be calibrated using the absolute level calibration devices. - The standard noise measurement range is 30-130 dBA, and the measured value (Leq) is about 30 dBA in a quiet room of the household. Due to the presence of background noise, noise levels are never measured at 0dBA even in very quiet environments. In a typical anechoic room, the noise level is around 5-15 dBA. - At the initial startup after installing the app, the iOS system asks for permission to access the built-in microphone. In this case, you need to enable access to the microphone. If you have not enabled this setting, this app cannot work by privacy restrictions of the iOS system. Please enable the access permission on the iOS setting, "Settings > Privacy & Security > Microphone". Please visit our iOS app support page for more information on this app.