Soviet electricity meter のアプリ分析 3月29日

The smartwatch dial on the Wear OS platform supports the following functionality: - Display of the date (in the upper circle) and the full day of the week in English - Segments with hours (24 time format), minutes and seconds are presented in the form of drums of a Soviet electricity meter with numbers applied to them - The number of steps taken is displayed (on a plate that imitates the serial number of the meter) - Burned kcal and the current pulse are displayed in the lower left part of the dial, in the form of an imitation of technical records of the electricity meter - The battery charge is presented in the form of a small dial with a red arrow, which is located in the upper right corner of the electricity meter display (next to the flashing red LED). Here I also made a tap zone, clicking on which will open the "Battery" application (this way you can find out more about the amount of charge remaining) IMPORTANT! I can guarantee the setup and operation of tap zone only on watches from Samsung. If you have a watch from another manufacturer, the tap zones may not work correctly. Please consider this when purchasing a watch face. I made an original AOD mode for this watch face. To display it, you need to activate it in the menu of your watch. Please note that in AOD mode, the picture on the watch is redrawn once per minute. Therefore, the movement of the drums with numbers and the rotation of the disk simulating the amount of energy consumed will be stopped. For comments and suggestions, please write to e-mail: eradzivill@mail.ru Join us on social networks: https://vk.com/eradzivill https://radzivill.com https://t.me/eradzivill Sincerely, Eugeniy Radzivill