sCS commissioning vs PROset App Usage & Stats

The sceneCOM S commissioning app has been specially developed to help make commissioning the sceneCOM S lighting control system intuitive. The DALI-2-based, scalable lighting control system which is covers variety of applications: from complex stand-alone luminaire setups to small to medium building areas encompasses a wide range of functions – from simple switching on and off and dimming/brightening to daylight linking – even with Tunable White lighting – and individual lighting scenarios. Each system supports up to 64 DALI 1 or DALI 2-based LED drivers and 16 input devices such as sensors or momentary-action switches. A single DALI LED driver or control device can therefore belong to several groups and thus various scenes.   Individual luminaire setups can be as well quiet complex and consist of up to 4 independent light heads with multiple drivers, groups and control devices like sensors and push button interfaces. Lighting manufacturers are able to create various luminaire setups using new Free-standing luminaire (FSL) configurator.   With the latest release sCS Comissioning APP is able to bring advantages of dynamic time-based lighting to our customers as new sceneCOM S RTC hardware support highly accurate real time clock. Now it is possible to assign different Human Centric Lighting profiles to one or multiple groups with Tunable White luminaries. The app is so intuitive to use, commissioning can be completed in just four simple steps. A particularly practical feature is Bluetooth, which enables unlimited use of the app even in offline mode. Step 1: Create In the first step, the new project is created. The basis for this can be either a new floor plan or a cloned layout. Luminaires are grouped and planned with corresponding light scenes. Step 2: Connect and identify Once the sceneCOM S commissioning app is connected to the sceneCOM S application controller, the system components (e.g. LED drivers, sensors or switches) in the app are automatically addressed. Easy device identification with the single touch of the device icon or single press of the switch push button. Step 3: Plan Using drag and drop, system components such as luminaires, sensors and momentary-action switches can now be placed in the floor plan and assigned to the various groups. Step 4: Configure The desired functions can then be defined and assigned. Finally, the project can be PIN-protected. Completed projects and templates can be shared or copied and pasted to other projects. An over-the-air update ensures that the software is always up to date.
  • Apple App Store
  • Free
  • Utilities

Store Rank

- -

Thanks to the PROset technology, the addressing, configuration and maintenance of the emergency luminaires is a breeze: the luminaires equipped with the new EMpower PROset control gear can be programmed directly via NFC interface of control gear. Procedure: with the PROset Pen (article number: 22170290), the control gear of the luminaire can be programmed directly. The PROset app provides additional functions (dimming levels, Black box, control gear exchange via the database). For this, the smartphone can be paired with the PROset Pen via Bluetooth (select “Connection via Bluetooth” on the start screen). Note: Before the first writing process, a control gear must be read out -> The article number and designation of the luminaire as well as the address range are available. Addressing: small, difficult-to-operate rotary switches belong to the past. The address can be selected by simply scrolling. Switching mode: Selection between maintained light (switched on in mains and emergency operation) and non-maintained light (switched off in mains operation). Setting for luminaires without connection to a system / parameter is overwritten by the system to "maintained light". Dimming level: Setting of the dimming level in mains operation (AC level) and in emergency operation (DC level, only for centrally supplied emergency luminaires). Setting for luminaires without connection to a system / parameter is overwritten by the system to default settings. Maintenance / Black box feature: With the new NFC interface, statistics such as errors, temperature, tests and operating times are immediately available. Maintenance / device exchange: simple control gear exchange via the NFC interface. The configuration data (operating parameters of the LEDs) can be copied from an old control gear or selected from a database. Device exchange via copy function: Activate device exchange -> Read out the configuration data from the old control gear -> Write the configuration data on the new control gear. The address, switching type and dimming levels are also transferred. Device exchange via the database: Select the article number -> Write the configuration data on the new control gear. Address, switching mode and dimming levels can be configured in a second step. Features of the app: - Fast and easy operation - Easy setting of the address via a scroll wheel. The simple configuration excludes incorrect switch settings. - Configuration of the luminaire (switching mode, dimming levels) possible without central controller. - Maintenance: The Black box function displays statistics such as errors, temperature, tests and operating times. Contents of the black box data can be forwarded to the headquarters for further analysis. - Control gear exchange via the copy function or the integrated database
  • Apple App Store
  • Free
  • Utilities

Store Rank

- -

sCS commissioning vs. PROset App ranking comparison

Compare sCS commissioning ranking trend in the past 28 days vs. PROset App

Rank

No Data Available

sCS commissioning vs. PROset App ranking by country comparison

Compare sCS commissioning ranking trend in the past 28 days vs. PROset App

No Data to Display

Compare to any site with our free trial

Get started
sCS commissioning VS.
PROset App

December 15, 2024