Machinist Calc Pro vs Macro Terminal CNC Usage & Stats
Ideal for machining pros, machine setters, tool and die makers, production engineers, shop managers and shop owners who want to increase productivity and profits in the design, layout and set-up stages of production and reduce wear and tear on costly cutting tools.
And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.
The Machinist Calc Pro is the first machining math and reference tool to provide a complete assortment of machine shop solutions. It has more complete Thread data than the Machinery's Handbook, including step-saving Thread and Drill Size chart look-ups, speeds and feeds, right triangle solutions, bolt patterns and much more.
Spend more time machining and less time looking up specs and data in books, on charts or in computer programs.
FEATURES:
• Created by Calculated Industries, the originator of the award-winning Construction Master calculators
• Built-in help, just press and hold a key
• All the functionality and solutions of the handheld Machinist Calc Pro calculators and optimized for the iPhone device user
• Entry Editing Backspace Key – with a swipe of a finger (left - to - right)
• A complete User’s Guide is available free at www.calculated.com
DEDICATED FUNCTIONS:
• Speeds and Feeds - Calculate for Milling, Turning and Drilling; Spindle Speed (RPM), Feed Rate (IPM), Cut Speed, Cut Feed, Feed per Tooth, Number of Teeth and Radial Chip Thinning adjustment factor
• Thread Size - Enter numeric, fractional or metric thread sizes and display tap, roll tap, close and free fit drill sizes. Display pitch, major and minor diameters
• Drill Point - Enter the cutting angle and Drill Size and calculate the Drill Point cut depth
• Drill Size - Enter numeric, letter, fractional or metric Drill Size and display the closest fitting Drill Size and scroll through available drill sizes
• 3-Wire Measure - Enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter
• Trigonometric Functions - Sine, Cosine, Tangent, Arcsine, Arccosine, Arctangent
• Right Triangle Math - Enter, calculate Angle, Hypotenuse, Opposite and Adjacent side lengths
Additional Features:
• Thread Classification Tables
◦U.S.
- Internal (3) 1B, 2B, 3B
- External (3) 1A, 2A, 3A
◦Metric
- Internal (14) 3G-9G and 3H-9H
- External (28) 3g-9g, 3h-9h, 3e-9e, 3f-9f
• U.S. and Metric Unit Entries and Conversions
◦Decimal Inches/mils
◦Feet-Inch-Fractions
◦m, mm, cm
◦Area, Volume and Weight
• Works as a Standard Calculator
TRADEMARKS:
Machinist Calc® is a registered trademark of Calculated Industries, Inc.
- Apple App Store
- Paid
- Utilities
Store Rank
- -
Welcome!
For more interesting information and better quality pictures, please visit our website:https://kandksoftware.github.io/macro-terminal-pro/
Macro Terminal CNC is a powerful CNC simulator for CNC milling and CNC lathes machines with FANUC / HAAS controller as well as CNC routers.The core of CNC Macro Terminal is especially designed for this purpose interpreter with a built-in debugging process tool to execute and analyze CNC macros (Fanuc Custom Macro B). You should know that Macro Terminal CNC is the only CNC software in the world that shows all math and logic operations one by one, line by line (known as parse tree).
All this makes Macro Terminal CNC the best choice for learning, debugging, writing and simulating CNC programs and macros and it gives the opportunity to better understand parametric programming.
Please note that Macro Terminal CNC also supports G16, G52, G68 and Haas G70 Bolt Hole Circle, Haas G71 Bolt Hole Arc, Haas G72 Bolt Holes Along an Angle.
Compatible with CNC controls: Fanuc 0(M/T), Fanuc 6(M/T), Fanuc 10(M/T), Fanuc 11(M/T), Fanuc 15(M/T), Fanuc 16(M/T), Fanuc 18(M/T), Fanuc 20(M/T), Fanuc 21(M/T), Haas and others using CNC macros based on Fanuc Custom Macro B.
General informations about Macro Terminal CNC:
- it works with most G-codes which means it's great for testing and learning typical CNC programming
- executing CNC macros
- reading popular system variables
- fully compatible with Fanuc Custom Macro B and Fanuc-compatible controls (e.g. HAAS, SINUMERIK 802D)
- math functions supported: sin, cos, tan, asin, acos, atan, sqrt, abs, round, fix, fup, ln, exp, pow
- showing the assigned variables and colors the new assigned variables
- showing a parsing tree (great solution for debugging and learn CNC macros - parametric programming)
- running line-by-line (manually and auto-play mode)
- CNC simulator (a graphical representation of tool path) XY, XZ, YZ (milling) and XZ (lathe) mode
- 23 examples of CNC programs and CNC macro programming
- mill/lathe mode
- FANUC / HAAS mode
- undo, format, copy, surround features
- full support G16 (polar coordinate), G51 (scaling), G52 (shift work offset), G68 (coordinate rotation), G65 / G66 (macro subprogram call), G98, G99, repeat canned cycle (L and K)
- supporting for Haas G70 Bolt Hole Circle, Haas G71 Bolt Hole Arc, Haas G72 Bolt Holes Along an Angle
- circular interpolation supported by using (I, J, K or R)
- supporting for old FANUC repeat subprogram syntax (for example:P120001, 12 - number of repetitions, 0001 - subprogram name)
- supporting FANUC (4digits) and HAAS program title format (5digits)
- metric/imperial mode
- syntax checker (G-code analyzer, open brackets etc.)
- reading file with EOB ( ; ) / not or mix
- output syntax highlighting
- save/save as/open file/clear
- save/open file with extension: txt
- auto file save (1s, 2s, 4s)
- custom look (2 themes, font color, font size)
Languages:
- English
- Français
- Deutsche
- Italiano
- Español
- Suomi
- Nederlandse
- Svenska
- Norsk
- 한국어
- 日本語
- Dansk
- Polski
- Magyar
- Pусский
- Português
- 中文
- Türkçe
- Melayu
- हिन्दी
- اَلْعَرَبِيَّةُ
- Română
- Lietuvių
- Latviešu
- Eesti keel
- Slovenský
- Český
- Ελληνικά
- Tiếng Việt
Thank you for purchase Macro Terminal CNC
- Apple App Store
- Paid
- Utilities
Store Rank
- -
Machinist Calc Pro VS. 
Macro Terminal CNCDecember 27, 2024