Engine RPM vs Video tachometer Usage & Stats

Measure the RPM of an engine by analyzing the sound it makes. Engine RPM listens to the sound of a running engine and uses advanced signal processing algorithms to extract the frequency of that sound and calculate the RPM. This app is primarily for setup and diagnostics of engines. After setting the the number of cylinders and whether the engine is a 2-stroke or 4-stroke engine, the app can work with any internal combustion engine, from diesel tractors to aircraft engines to motorcycles to chainsaws. To use the app you must set an expected RPM range to guide the analysis algorithms to the correct RPM. A real-time graph of the autocorrelation graph is displayed to help in troubleshooting and adjusting the expected RPM range. The analysis requires a clear sound from the engine without excessive interference from extraneous sounds. Do not expect to read the RPM of an engine while other things are making too much noise at the same time. The analysis also requires that the RPM be stable. It cannot read the RPM of an engine that is rapidly accelerating. For this reason, and because of the need for adjusting the expected RPM range, this app should not be considered a drop-in replacement for an operational tachometer. Setup options include update periods from 93 milliseconds to 1.5 seconds, one to 12 cylinders, 2-stroke or 4-stroke, low-pass filtering, and signal clipping. The overall RPM range is 400 to 90,000 RPM (although at any one time, the operational range is typically +/- 30% around a nominal expected RPM). Precision is usually about +/- 10 RPM.

Apple App Store
Paid
Utilities

Store Rank

- -

Video tachometer

When the frame rate of a video matches the speed of a particular part, the effect is the same as using a strobe light. In the video, that part freezes. Since the frame rate of a video can be adjusted, this effect can be used to determine the rotational speed of a part. The smartphone must support slow-motion video recording (filming at a high frame rate). This is the case for all smartphones starting with iPhone 5S. The range is as follows: • 0.5—240 Hz (30—14400 RPM), for all phones from iPhone 6 onward • 0.5—120 Hz (30—7200 RPM), for iPhone 5S THE HERTZ (Hz) VALUE IS MORE ACCURATE THAN THE REVOLUTIONS PER MINUTE (RPM) VALUE, SINCE REVOLUTIONS PER MINUTE ARE CALCULATED FROM HERTZ AND ROUNDING IS DONE. To get a clear image, good lighting is important. The clarity of the image is controlled by the exposure of the video (exposure time and light sensitivity (ISO)). If the exposure time is reduced, the image will increase in clarity, but brightness will lower. To increase the brightness, you need to raise the camera's light sensitivity (ISO), but then the amount of noise increases. You also need to manually adjust the focus of the camera. The app can record video. The video format depends on the selected format in the app settings. If your iPhone supports 4K video format (3840x2160), then you can record 4K video at the frame rate supported by your iPhone. Text with important information is added to the frames of the recorded video: the selected frame rate, exposure duration, ISO, time stamp, time difference between the current and previous frames (Tcurr. − Tprev.), the sequence number of the frame in the recorded video. If you want any other information to be added, then let me know. You can choose to add only part of this information, and you can choose a different text color. You also have the option of not adding any information. You can change the information that is added and the color of the text while recording a video. At high frame rates, frames that do not have time to be processed may be discarded. This does not affect subsequent frames and can be controlled using the time difference between the current frame and the previous frame (Tcurr. − Tprev.). Dropping frames affects the video frame rate displayed in the "Photos" app. But the time interval between frames that were taken one after another and were not discarded will correspond to the selected frame rate. Frames may be dropped even when shooting slow motion video using the "Camera" app. You can check this by looking at the frame rate for slow motion video in the "Photos" app. Video containing the app's interface can be captured using the iOS "Screen Recording" function. To take a photo with the result of the measurement written on it, press the "Pause" button and take a screenshot. It is possible to choose a video format that has the best quality, but has a significantly lower maximum frame rate. The difference between the formats is clearly visible only when using the digital zoom. Also, when using a format with better quality, the Rolling Shutter effect is stronger. Therefore, the best quality format can be used at speeds less than about 1000 rpm. You can turn on hints for easier observation of changes in rotation speed. Hints show how to change the frame rate (decrease or increase) depending on the direction of rotation of the mark. The hints are selected manually, but then you do not need to remember this information. The hints are relevant for frequencies close to the rotation frequency. If the direction of rotation of the impeller is known, hints can be selected in advance. The arrow showing the direction of rotation of the impeller must correspond to the "+" button. The video tachometer measures the rotational speed in exactly the same way a stroboscopic tachometer would.