SF50 TOLD vs Eclipse QRA Usage & Stats
SF50 Takeoff and Landing Data helps Cirrus SF50 Vision pilots do their performance calculations. Simply launch the app, enter your weights, and the app will calculate how much runway you need to take off or land in your Vision Jet.
SF50 TOLD supports both automatic and manual weather entry, custom safety factors, non-normal configurations (such as FLAPS 50 ICE or FLAPS 0), and runway contamination. All data comes from the SF50 G1 or G2+ Airplane Flight Manual* and is interpolated for current conditions.
Important Note: This app downloads airport and weather data for the United States only. On first launch, the app will download airport data for the entire United States. This process takes a few minutes.
*This app has not been approved by the FAA or by Cirrus Aircraft as an official source of performance information. It is your responsibility to ensure that the performance data you use is accurate for current conditions.
AFMs:
Aircraft Serials with Cirrus Perspective Touch Avionics System and FL280 Maximum Operating Altitude
P/N 31452-001
Revision A1
Aircraft Serials with Cirrus Perspective Touch+ Avionics System and FL310 Maximum Operating Altitude
P/N 31452-002
Revision 4
Airplane Flight Manual Supplement for Updated Thrust Schedule
P/N 31452-111
Revision 1
- Apple App Store
- Free
- Utilities
Store Rank
- -
The Eclipse Quick Reference App (QRA) is an interactive version of the Eclipse Quick Reference Handbook.
Checklist:
Effortlessly scroll through the Eclipse checklist iPad style and mark each action as complete with a single touch. Quickly scroll to any section of the checklist (Startup, Taxi, Takeoff, Climb, Cruise, Approach, Landing, Shutdown) using dedicated buttons. Never lose your place in the checklist as the app remembers your position even when exited.
W&B:
Quickly configure your jet’s seat layout by dragging seats along their tracks and enter the passenger weights with a flick of your finger. Specify your existing fuel load and how much fuel to add, and the app calculates the uplift in gallons automatically. A real time CG graph shows your CG envelope.
Fuel Planning:
Enter distance to destination, planned descent type (normal, idle, early), MCT or LRC power, cruise altitude, winds and ISA temperature, and the app returns fuel to destination, time en route, fuel remaining at destination, and nautical mile range at destination.
Performance Lookup (Takeoff, Cruise, Landing):
Takeoff: Enter field OAT, Elevation, and Takeoff Weight, and the app computes runway requirements, climb weight limitations (climb / tire speed), v50 climb data, and vSpeeds. Optionally enter wind and runway slope to fine-tune the results further.
Takeoff Minimums: Enter the ft/nm-altitude requirements from a departure procedure, and the app will show you the required gradient and the Eclipse’s Vy performance in both normal and engine out configurations at that altitude.
Climb & Cruise: Enter OAT, altitude, and weight and the app computes the Fuel Flow, KTAS, nm/100 lbs. for both MCT, LRC, and S/E LRC. No need to calculate the LRC FF manually. Trilinear interpolation yields numbers within 2-3 knots and 2-5 lbs/hr accuracy. Climb to altitude and Vy climb at altitude are also displayed.
Descent & Landing: Enter field OAT, elevation, and takeoff weight, and the app computes runway requirements, vSpeeds, and balked landing performance. Optionally enter wind and runway slope to fine-tune the results further.
Emergency Procedures:
Quickly find any CAS Message or Unannounciated Procedure in the color coded, searchable list. Touching a message shows a full page action page (scrollable) from the QRH.
DSU Upload:
Upload aircraft DSU Data (Diagnostic Storage Unit) to FlightData.com for processing, storage, and sharing with maintenance centers.
Manuals:
Qualified pilots can view the AFM and other documents through the Eclipse QRA application.
- Apple App Store
- Free
- Utilities
Store Rank
- -
SF50 TOLD VS. 
Eclipse QRADecember 16, 2024