Pipe Working Pressure Calc vs VIBRO-LASER Usage & Stats
Pipe Burst Working Pressure Calculator is a physics/math tool designed to calculate fluid pressure, pipe wall thickness, pipe outside diameter, safety factor, or material strength.
Features:
- Instant calculations
- Results can be copied to other apps
- Formulas included for reference
- Supports up to 16 decimal places
- Supports various units for each input
To find the burst pressure of a pipe, Barlow's Formula is used, along with associated equations to determine the working pressure of a pipe with a known diameter.
Barlow’s Formula establishes the relationship between internal pressure, allowable stress, nominal thickness, and diameter.
Equation:
P = (2*S*T)/(OD*SF)
Where:
P = Fluid Pressure (psi)
T = Pipe Wall Thickness (in)
OD = Pipe Outside Diameter (in)
SF = Safety Factor (for general calculations, use 1.5 – 10; use 1 for bursting pressure)
S = Material Strength (psi), minimum yield strength
Thank you for your support! Visit nitrio.com for more apps for your iOS devices.
- Apple App Store
- Paid
- Utilities
Store Rank
- -
Quickly and easily perform precision horizontal and vertical shaft alignment with your iOS device.
Base kit:
- The 9-12-3 clock method is the basic method for taking measurements;
- Take measurements at any three positions of the shaft rotation with at least 40 degrees total rotation.;
- Measure and align vertical and flange drive machines;
- Soft-Foot check option;
- The optical averaging filter reduces the influence of external visual challenges such as lighting, steam, and other visually impairing variables while taking measurements;
- Thermal growth calculation of machines.
Advanced features:
- SMARTSPIN™. The measured values are automatically recorded during shaft rotation. With hundreds of points registered, you can start measuring at any shaft position.
- SMARTPOINTS™. This multipoint method allows you to record an unlimited number of points at any point in the shaft rotation.
- SELECT COUPLING TYPE. This option allows you to specify the coupling type used for shaft connection – i.e., short, flex, or spacer shaft.
- CARDAN/OFFSET MOUNTED MACHINES. This option is specially designed for alignment of cardan and offset mounted machines. You will need an additional Cardan bracket kit for this feature.
- MACHINE TRAIN. Enable this option and align shafts of up to five machines that are connected together.
This software is designed to work with VIBRO-LASER measuring units with firmware version 3.7.4. If the version of the measuring units is lower than the installed one, please contact distributor in your region.
- Apple App Store
- Free
- Utilities
Store Rank
- -
Pipe Working Pressure Calc VS. 
VIBRO-LASERDecember 30, 2024