GPS Tracking Monitor vs SignalScope Basic 2020 Usage & Stats
Model GPS - GT02
Functions:
- Small size, internal GPS and GSM antenna, and easy to install
- Double location modes: GPS and LBS (Location Based Services)
- GPS data uploading at interval and rollcall function
- Tracking by SMS, and reply English address
- Data re-sent from signal dead zone function
- Geo-fence alarm
- Domain name setting, remote update
Model GPS - GT08
Functions:
- GSM 850/900/1800/1900 Quad band
- Wide for voltage input range: 9-36vDC
- GPS continuous positioning, GPRS timing interval
- Check location via SMS
- Real-time tracking and upload location information
- ACC detection and upload vehicle status
- Access location information via SMS or GPRS(TCP)
- Built-in CPU, eliminating breakdown automatically
- Built-in high sensitive GPS chipset
- Relay for tele-cut off fuel/power
- Built-in ON/OFF power, wide input voltage range
- External MIC for voice monitoring
-Three LED indicators for displaying working status
- Built-in GSM & GPS antenna
- Built-in acceleration sensor for vibration alarm
- Built-in 450mAh battery for alarm when power supply is disconnected unexpectedly
- External SOS button for emergency alarm
- Check location via platform
Model GPS - GT100
Functions:
- GPS+GSM+GPRS wireless network
- Built-in high sensitive MTK GPS chipset
- AGPS fast locating function
- Built-in GPS & GSM antenna
- Support ACC detection
- Built-in acceleration sensor for vibration alarm
- Tele-cut off (petrol/power) function
- Low voltage protection
- Built-in 800mAH battery
- IP65 dust and water proof
EX 508
1. Small size and easy for installation
2. Real-time track by web system
3. Two-way voice and SMS communication
4. Listening monitoring, History playback
5. Re-upload the location data function
6. Disable or enable engine remotely
7. Detect the ignition, door, Air-condition etc
8. Fuel monitoring and temperature monitoring
9. Record mileage information
10. Dispatching for taxi, bus, logistics trucks
11. Emergency alarm, Acceleration alarm
12. Fuel and Temperature changing alarm
13. Illegal door open alarm, Geo-fence alarm
14. 3 RS232 serial port to support Camera, RFID etc
EX 528
1. Small size and easy for installation
2. Real-time track by web system
3. SMS configuration and communication
4. Listening monitoring, Fuel monitoring
5. Able to re-upload the location data
6. Disable or enable engine remotely
7. Detect the ignition, door, Air-condition etc
8. Record mileage information, History playback
9. SOS alarm, Power-off alarm, Geo-fence alarm
10. Over-speed alarm, Idling alarm, Parking alarm
11. Moving alarm, Acceleration alarm
12. Illegal door open alarm, Fatigue driving alarm
EX 588
1. Small size, internal GPS and GSM antenna, and easy to install
2. Double location modes: GPS and LBS ( Location Based Services)
3. GPS data uploading at interval and rollcall function
4. Tracking by SMS, and reply English address
5. Data re-sent from signal dead zone function
6. Power-off alarm, Geo-fence alarm
7. Over speed alarm function, parking alarm
8. Trailer alarm, SMS for alarm notice
9. Domain name setting, remote update
Note : Continued use of GPS running in the background can dramatically decrease battery life
- Apple App Store
- Free
- Utilities
Store Rank
- -
NOTE: This app is no longer recommended for purchase, unless you need to run it on iOS 12 or 13. Otherwise, check out SignalScope X, or the new SignalScope Basic 2022.
SignalScope Basic 2020 offers a basic tool set to meet your measurement and analysis needs as an engineer, consultant, educator, student, researcher, or savvy hobbyist in areas such as acoustics (sound and vibration), audio, electronics, and electroacoustics.
Features:
- Analyze signals coming from the Mac or iOS device’s current audio input device.
- Assign engineering units to your input signals and calibrate external transducers for accurate measurements.
- Assign input channel units and sensitivities for individual USB Audio devices.
- Direct support for Digiducer digital accelerometers and 485B39 USB ICP signal conditioner from The Modal Shop.
- Direct support for miniDSP UMIK-1 measurement microphone and EARS headphone/IEM measurement system.
- Nominal acoustic sensitivities included for iPhone and iPad built-in microphones, voltage sensitivities for headset input (including the Lightning-to-headset adapter included with recent iPhone models)
- Manually switch between available audio input sources.
- Load microphone frequency response data (FRD) and apply frequency response correction (FRC) to FFT-based measurements.
- Manually adjust audio sample rates, even up to 192 kHz, depending on input hardware.
- Save acquired measurement data to CSV, tab-delimited ASCII text, or MAT files.
- Save high-resolution analyzer display images to PDF files.
- Retrieve your data files from your device via Files (iCloud Drive), iTunes File Sharing, or through a web browser on another device. Files may also be opened in other compatible apps (e.g. Mail, Notes, Numbers, Dropbox, etc).
Basic Tools:
- Oscilloscope - Basic oscilloscope and triggering functions.
- FFT Analyzer - Spectrum analyzer with user-settable frequency limits and basic triggering
- 2D Real-time Spectrogram Analyzer
- XY Plotter - Create Lissajous curves on your Mac, iPhone, or iPad.
Learn more about SignalScope Basic 2020 at FaberAcoustical.com.
SignalScope Basic 2020 will receive major upgrades, consistent with those available in the SignalScope X Basic Tool Set subscription, through calendar year 2021, after which it will receive maintenance updates for a limited time. It can be used indefinitely thereafter on a compatible version of iOS.
- Apple App Store
- Paid
- Utilities
Store Rank
- -
GPS Tracking Monitor VS. 
SignalScope Basic 2020January 13, 2025