iN·Command vs Mopeka TankCheck Usage & Stats
The iN-Command App with Global Connect functionality is specifically for use with our 3rd generation RV Control and Monitoring product which is identified by the Global Connect logo on the Display Commander (LCD touch controller). We have updated the App graphics, added control functionality (including Climate control for compatible HVAC systems) as well as the ability to monitor and control your RV remotely through the Cloud (internet connection required). By connecting your smart-phone or tablet to the system’s LCD touch controller and registering your cloud account, iN-Command now puts you “In Command” of your RV from any location.
Local (Bluetooth) and Remote (Cloud) Functions
• Water Heater Control: On/Off (gas & electric)
• Water pump Control: On/Off
• Tank Monitoring: Fresh, Black, and Gray
• Lighting Control: Interior, exterior, security, awning and custom 1, 2, 3
• Generator Control/Monitoring: Prime/Start/Stop control, Voltage, Fuel, Hours, Scheduling and Diagnostics (low oil, over crank, service)
• Climate/HVAC Control: Thermostat functions including Cool, Heat, Auto, Off, Vent Fan, Temp Set and Scheduling for select Dometic and Coleman products
Local Control Functions (over Bluetooth only, not accessible remotely by cloud)
• Slide Room Control (Up to 5 Slides)
• Awning control (Up to 2 Awnings)
• Stabilizer Jacks (Front & Rear)
- Apple App Store
- Free
- Utilities
Store Rank
- -
This application is designed to be used with the Mopeka TankCheck sensor. The Tank Check application can measure the LPG propane level to tell you the exact fill level and when your tank is empty. It can be used on tanks found in RVs, heaters, BBQ grills, etc. The Tank Check sensors are magnetically stuck to the bottom of your propane tank and will periodically measure and wirelessly send the fill level or percentage to the Tank Check app. Stick it on the bottom of your tank and know exactly when you are running low on propane! This technology is patent pending.
More info about the TankCheck Sensor and links to purchase the sensors can be found on the Mopeka website at http://www.mopeka.com
Usage:
1. To pair your Tank Check sensor to the phone, simply press the "Sync" button on the back of the sensor while the app's main screen is visible. The first time you use your Tank Check sensor you must press the "Sync" button 5 times in a row in order to wake up the sensor.
2. Place the Tank Check sensor in the center of the underside of the tank. Most tanks have a small "flat" spot on the center and this is the nominal location for the sensor.
3. Flip the tank over. Once the fluid has settled the app will display a reading. Note that the LPG fluid will be sloshing around in the tank for a few minutes and the quality of the measurements will be low until this has stabilized.
- Apple App Store
- Free
- Utilities
Store Rank
- -
iN·Command VS. 
Mopeka TankCheckDecember 27, 2024