MyAlarm iFob Control 與 Holman Home 使用情況與統計

NOTE: This app requires a compatible security system and an interactive MyAlarm service plan to function. Contact your MyAlarm Registered Installer to discuss service plans and options before downloading the app. DESCRIPTION: The MyAlarm iFob Control app provides real time control and feedback of compatible, IP enabled alarm systems. Users can arm and disarm areas, control outputs and doors, view system troubles and alarm system history as required. Multiple sites are supported allowing easy interface to your home, office and holiday house etc if required, and all events performed via the app are recorded in the system history log for easy auditing. All user restrictions configured on the panel are enforced by the app meaning app users can only control areas and doors they have access to on the system. Selected MyAlarm service plans include the ability to report alarm events via push notification and email. Each site can be configured for 10 iFob Control users and various app functions can be restricted by the system owner if required giving them total control. If you are in doubt how to set these options contact your MyAlarm Registered Installer for assistance. If you don't have a MyAlarm Registered Installer you can locate one in your area here https://www.myalarm.com.au/findInstaller COMPATIBILITY: The iFob app is currently only compatible with the panels listed below. Most older version panels can be upgraded to meet the firmware requirements by your alarm installer. If you do not have one of the systems listed then do not download the app. PANELS: * Bosch - Solution 144 Alarm Panel (via firmware upgrade to Solution 6000 v2.25 and higher) * Bosch - Solution 6000 Alarm Panel (v2.25 and higher) * Bosch - Solution 6000-IP Alarm Panel (v3.00 and higher) * Digiflex - Vision-X Alarm Panel (v2.25 and higher) * Digiflex - Vision-XIP Alarm Panel (v3.00 and higher) IP CONNECTIVITY OPTIONS: * CM751 Ethernet module (v2.16) * CM745 3G Radio module * CP741 Wi-Fi Enabled Graphic Keypad * CP737 Wi-Fi Enabled 3.5" Graphic Keypad REQUIREMENTS: For the iFob Control app to function your system needs to meet the compatibility requirements listed above. Your system needs to have been installed and configured for MyAlarm services and you will need to sign up for a MyAlarm service plan with your installer. Contact your MyAlarm installer for more information regarding your alarm system configuration and MyAlarm service plan options.

Apple App Store
免費版
生活方式

商店排名

- -

Holman Home

With the Holman Home app you can use your smartphone to control all the programming and interface functions of a continually increasing range of Holman and K-Rain garden products via a permanent internet (and Wi-Fi) connection, you can then control the device remotely from anywhere in the world (using mobile data or Wi-Fi). These products are designed for easy DIY installation. You can control the following products with the Holman Home app: 1 | GARDEN WATERING • WX8 Irrigation Controller – 8 Zones • WX1 Tap Timer – 1 Zone • WX2 Tap Timer – 2 Zones • K-Rain KRX6 - 6 Zones • K-Rain KRX8 - 8 Zones • K-Rain K Connect Tap Timer (Bluetooth only - can only connect to tap timer when within Bluetooth range) • K-Rain K Connect Tap Timer connected to K-Rain K Connect Wi-Fi Hub Features • You have remote control access to your device to change any setting at any time via the app (excluding K Connect Tap Timer - Bluetooth only) • Schedule three Starts to run on the days of your choice (KRX8 has four Starts and K Connect Tap Timer has eight Starts) • Manually run any zone or Start from anywhere in the world (excluding K Connect Tap Timer - Bluetooth only) • Set your run time in hours and minutes • WX8s with the Holman Rain Sensor “Evie” or other third party rain sensors are able to automatically disable watering during wet weather • WX1s and WX2s with Moisture Sensors are able to automatically disable watering when the soil moisture is above the set threshold • KRX6s and KRX8s with a third party sensor is able disable watering using Scene Automations • It is easy to share your device with other family members or users 2 | Garden Lighting • RGB Garden Light • WW (Warm White) Garden Light Features • Easy 2-Pin (WW) or 4-Pin (RGB) Plug + Socket System. No Electrician required • Scene automations and custom scene options allow you to light up your garden, however you want 3 | WEATHER MONITORING • Helios Weather Station Features • Compatible with other Holman Home products • Accurate weather readings for your property • Includes 10” Indoor LCD Display Panel • Daily, Weekly and Monthly graphs of key weather data