KQ MIDI Modulate 與 Dozecal 使用情況與統計

This is a tool for MIDI experts. Not recommended for beginners. - This app by itself does not produce sound. - It converts input MIDI signals and outputs them. - You can use 8x16 pads to output any MIDI signal. - You can route MIDI devices freely. - This app includes 2 AUv3 Plugins. - Compatible only with MIDI 1.0; MIDI 2.0 is not supported. - The developer uses this app conveniently with a MIDI wind controller. Convert Converts the values of control signals. Cannot be set per channel. Note Ctrl, Threshold: Transmit note on messages only if the value of the Note Ctrl is above the threshold. Key: Key of the note signal Vel1: Velocity of Note On Vel0: Velocity of Note Off CC: Control Change AT: Channel Aftertouch PB: Pitch Bend PC: Program Change N/A: Not applicable HR: High Resolution - when enabled, handles 14-bit signals. E: Envelope, tap to open the settings window. F: Filter, tap to open the settings window. LPF: Low-pass filter, smoothes out value changes. The higher the Strength value, the slower the change. HPF: High-pass filter, applies only abrupt value changes. The value automatically approaches the Return Base value. The higher the Strength value, the faster the change. Tap the graph to switch between line graph, history, and bar graph. Long press the graph and tap “Edit Curve” to edit the curve. "- 0 +" denotes the offset; this value is added to the input value. Press the button in the top left corner to switch to a minimized view. The "!" in the top right corner is the panic button. Pressing it sends All Notes Off and All Sound Off messages. Trigger Sends signals according to the rules upon receiving specified MIDI signals. You can specify channels. Harmony: Shifted note signals Channel Rewrite: Rewrite of channels Signal Trigger: Trigger of any MIDI signal Value Offset: Increment/decrement of value Filter: Suppression of transmission Pad Consists of 8x16 pads. Note: Note signal CC/AT/PB Oneshot: Control signal (when pressed) CC/AT/PB On/Off: Control signal (press/release) Program: Patch Change (bank selectable) Convert Offset: Offset specification for the Convert screen Load Preset: File loading on the Profiles screen Misc/SysEx: Any signal Latch: Pads become toggles. If a group is specified, the pads act as radio buttons. Options Key Delay: Delays Note On Velocity Convert: When outputting Vel1 in Convert, select whether to always convert or only when legato is not present MIDI Rx Channel: Receiving channel MIDI Tx Channel: Transmitting channel Filter Other Channel: Suppress transmission of channels other than receiving channel Duplicated Notes: Specifies handling of duplicated notes Note that: The application and description contain machine-translated text.

Apple App Store
付費
公共設施

商店排名

- -

Dozecal

Dozecal is an educational RPN* calculator to promote the use of Base Twelve in math and science. The usual math functions are available in both DUODECIMAL and DECIMAL modes. Conversion is automatically made when switching from one mode to the other one. Trigonometric operations uses DEGREE as unit of measure. For more information about Base 12, please visit the Dozenal Society of America. * RPN : the Dozecalc calculator uses the Reverse Polish Notation (RPN). This notation seems complex but has many advantages over algebraic notation and is more intuitive once you have understood the idea. The calculator has a stack and any operation that requires two numbers is using the bottom stack layers (X and Y). Key ENTER to push the stack up and separate one number from the next. To perform arithmetic, key in the first number, press ENTER to separate the first number from the second, then key in the second number and then select and operator such as the numerical functions +, -, * or /. The result appears immediately after you press the numerical function key. The operator is keyed in only after both operands are in the stack. Example: calculate 3 + 4 Key sequence: 3 ENTER 4 + Result: 7 The result of any operation may itself become an operand. You do not need to press enter again to use the result. The "7" is already entered. Example: add 2 to the previous result Key sequence: 2 + Result: 9 Example: calculate 5 * (3 + 4) Key sequence: 3 ENTER 4 + 5 * Alternate key sequence: 5 ENTER 3 ENTER 4 + * Disclaimer: results and precision may occasionally be incorrect. Should you report them at johan@unumdesignum.com, and the author will be happy to fix !