Magneto Metal 與 Sensor Technology Engineering 使用情況與統計
The app can be used for the following purposes:
1. Metal and electronic device detector
2. Test to see if the compass will give accurate readings
3. Calculate true north
4. Get an indication of the field strength around the device
5. Use Ampere's law to find the source of electrmagnetic noise
6. Detect extreme low frequency (ELF) radiation
PLEASE NOTE THE APP DOES NOT NEED OR USE ANY INTERNET AND NO USER DATA IS STORED
ELF (exstremely low frequency) radiation is rf radiation at low frequencies. The app measures ELF radiation below half the sampling rate (about 25 hz). Some people are more sensitive to ELF radiation than others. The app can give an indication of the radiation levels.
Compass : The measurements given as delta values is the electromagnetic radiation without the earth's field. The larger the delta values the more inaccurate the compass will be. The app also gives the value for the true north in relation to magnetic north.
For metal or electronic device detection the device must be very close to the metal or electronic device to detect it. It does not work over a distance like a real metal detector.
The watch app only works on Apple series 5 and later that have a build-in magnetometer.
Please read the terms and notes for using the app.
- Apple App Store
- 付費
- 公共設施
商店排名
- -
The STE App is the Bluetooth-enabled application for mobile devices to connect with STE radiation detectors. It provides a real-time detection interface in support of Countering Weapons of Mass Destruction (CWMD) and Explosive Ordinance (EoD) Missions. The app contains several features, including radiation exposure, accumulated radiation dosage, geospatial data and a data sharing capability that are primarily used by emergency responders to allow them to take action quickly and decisively.
STE App allows the user to connect the STE detectors to mobile devices using Bluetooth communication technology. It enables the user to stream the detector data (gamma and neutron) directly from the detector to a mobile device in real time.
Device Connection: Each time the STE device is turned on, Bluetooth communications are enabled, and the device is available for connection for two minutes. If the pairing is successful, the user can view the real time data stream for gamma and neutron detection in the application. Once the device is found and linked to the app, the device ID will be automatically stored in the app.
Data Streaming: After the successful connection, a waterfall graph and a display meter show the level of gamma detected in real-time, with options to select units such as CPS, µR/h, µrem/h, and µSv/h. STE detectors equipped with neutron detection are visible on the app and measure counts. Once the count rate exceeds the threshold (trip) value, the detector and mobile device will started alarming. Users can toggle between the screens to select various functions of the app.
Geo-Mapping: The app has an intuitive interface with a basic navigation system. That will display the "trace history" of where the detector has been carried. If the device detects radiation and sounds an alarm, the map will trace that information with colors. The exact location and address will be recorded in the alarm data.
Data Sharing: STE app compiles all the relevant data that can be shared via emails, SMS, and other methods available on the mobile device.
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
Magneto Metal VS. 
Sensor Technology Engineering1月 6, 2025