首頁
App 分析
Filament Swatches
Filament Swatches Vs. Proximity - Access Card Calc

Filament Swatches 與 Proximity - Access Card Calc 使用情況與統計

FilamentSwatches is an app that allows you to manage and store your different 3D Printing filament colors. In addition, you can use the app on iPhones with an NFC chip to read from and write the swatches to NDEF-compliant NFC tags that you can then stick onto your physical printed filament samples. This allows you to form a digital link between your physical samples and information about the filament that was used to print them. The app encodes the filament information as a URL that is saved onto the NFC tag. This way, any NFC reader can be used to view the information saved on the tag. Personally, I use the app together with 25mm NTAG215 black NFC tags that I stick on 3D printed mini filament spools.

Apple App Store
付費
公共設施

商店排名

- -

Proximity - Access Card Calc

Have a "naked" access card or fob and need to determine its appropriate number and facility code? If you're able to extract the binary or hexadecimal value then Proximity will do the rest. The first calculator of Proximity works one of two ways: By inputting the raw binary value of the card or by inputting the hex equivalent. To use the binary input, simply tap on the box and type in the binary value. The counter in the lower-right corner of the box will keep track of the amount of digits currently displayed. To use the hex input, tap on the box and enter the hex value. Once complete, select the bit length from the wheel below. This is only necessary when calculating from a hex value. After tapping on calculate, the output will be displayed. If there is more than one system in the same bit length, tap on Next to cycle through the different formats. The second calculator is simply the reverse of the first:  Input the facility code, card number, select the format, and tap calculate to generate the raw binary value. More formats will be released in future versions so long as the information is acquired. If there's a format not on this app and you have the breakdown information, send it to me and I'll fulfill the request. Currently supports the following formats: 26 bits HID® Standard (H10301) 26 bits Indala 31 bits HID® ADT 33 bits HID® Standard (D10202) 34 bits HID® Standard (H10306) 34 bits HID® Northern (N1002) 34 bits Indala Optus 35 bits HID® Corporate 1000® 36 bits Simplex 36 bits Lenel 36 bits S2 37 bits HID® Farpointe (H10304) 37 bits HID® (no Facility Code) (H10302) 37 bits HID® PointGuard 37 bits Software House 40 bits Casi Rusco 40 bits XceedID 40 bits Honeywell (P10001) 48 bits HID® Corporate 1000® Disclaimer:  HID® and Corporate 1000® are registered trademarks of HID Global Corporation or its affiliates. This application is not affiliated with nor endorsed by HID Global Corporation. Compatibility: iPhone / iPod touch on iOS 8.0 or later and iPad on iOS 12.0 or later. Found a bug? Something not working? Have a suggestion? Feel free to contact me via email: phil@locksmithapps.com