Wireless Audio AUv3 與 PolyBud Polyrhythmic Sequencer 使用情況與統計

Music making and audio processing has been growing and changing on iOS. The first app connections were with Audiobus, and then Inter-App Audio became available. The current standard is AUv3. There are many legacy apps and audio hosts, however, that have not updated. Wireless Audio AUv3 gives you an easy way to send audio from one iOS device to another using a low-latency WiFi connection; you can also connect audio unit hosts together -- either on a single device, or between devices using WiFi. There are no cables and boxes to buy (and to lose, or forget to take with you). Install the Transmit AUv3 onto an audio track of one host, the Receive AUv3 on the input slot of the audio track of another host, tap `connect,' and audio will be sent from one place to another with surprisingly low latency. The receiver can adjust buffering to maximize audio quality while minimizing latency. While your best results will be with a fast WiFi router and little cross-traffic on the network, you can still get a good connection even in noisy environments. Most modern DAWs support latency compensation, with the Receiver AUv3 reports -- this allows you to get precise synchronization of your recordings.

Apple App Store
付費
音樂

商店排名

- -

PolyBud Polyrhythmic Sequencer

PolyBud is a multitrack polyrhythmic AUv3 MIDI sequencer. You can add multiple note or MIDI CC tracks to the each pattern. The note tracks has the note, velocity, gate, ratchet, probability and randomisation modes. You can set different step lengths to the each mode which would introduce polyrhythmic variations immediately. Another great feature is the each track can run in a different rate which is great for creating unique polyrhythmic sequences. Also, you can assign different MIDI channels to the each track so that you can control multiple synths within a single PolyBud pattern. The MIDI CC tracks is great for modulating the synth parameters. You can introduce polyrhythmic modulations by setting the different step lengths and different rates to your MIDI CC tracks. Also, you can set a ramp value for smoothing up the CC value changes per step. If you set the ramp value to 0% then you can have the classic sample and hold modulation. PolyBud is a MIDI app and it don't produce any sound of its own. You need to route PolyBud's MIDI out to your audio apps in order to run PolyBud. For the AUv3 plugin, you need an AUv3 host app such as AUM, Cubase, NanoStudio, ZenBeats, BeatMaker, apeMatrix etc.