VIBRO-LASER 與 MultiSens-1234 使用情況與統計

Quickly and easily perform precision horizontal and vertical shaft alignment with your iOS device. Base kit: - The 9-12-3 clock method is the basic method for taking measurements; - Take measurements at any three positions of the shaft rotation with at least 40 degrees total rotation.; - Measure and align vertical and flange drive machines; - Soft-Foot check option; - The optical averaging filter reduces the influence of external visual challenges such as lighting, steam, and other visually impairing variables while taking measurements; - Thermal growth calculation of machines. Advanced features: - SMARTSPIN™. The measured values are automatically recorded during shaft rotation. With hundreds of points registered, you can start measuring at any shaft position. - SMARTPOINTS™. This multipoint method allows you to record an unlimited number of points at any point in the shaft rotation. - SELECT COUPLING TYPE. This option allows you to specify the coupling type used for shaft connection – i.e., short, flex, or spacer shaft. - CARDAN/OFFSET MOUNTED MACHINES. This option is specially designed for alignment of cardan and offset mounted machines. You will need an additional Cardan bracket kit for this feature. - MACHINE TRAIN. Enable this option and align shafts of up to five machines that are connected together. This software is designed to work with VIBRO-LASER measuring units with firmware version 3.7.4. If the version of the measuring units is lower than the installed one, please contact distributor in your region.