Belimo Display 與 W-BACnet 使用情況與統計
The Belimo Display App is the most innovative of its kind to access sensors. With the intuitive end-customer app, the current room values can be displayed and setpoints can be adjusted. Access protection prevents input by unauthorised people.
The following features are available to the user :
• Display room values (temperature, relative humidity, CO2) of all active room sensors & room operating units of the latest generation.
• Innovative setpoint adjustment with the intuitive app without the need for a display on the room unit
• Display of the CO2 concentration with traffic light function
• Various languages available (DE / EN )
The following sensors can be configured with the app:
• 22RT-19-1
• 22RTH-19-1
• 22RTM-19-1
• P-22RT...
• P-22RTH...
• P-22RTM...
Requirements:
• iOS 14 or newer
• iPhone 8 or newer
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
The W-BACnet app has arrived! Upgrade firmware for LumenRadio W-BACnet devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which BACnet MS/TP address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-BACnet app requires W-BACnet firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
Belimo Display VS. 
W-BACnet12月 15, 2024