首頁
App 分析
Tape Pro
Tape Pro Vs. Euclidean AUv3 Sequencer

Tape Pro 與 Euclidean AUv3 Sequencer 使用情況與統計

Tape Pro is a multi-fx tape emulation AUv3 plugin and app that introduces warmth, frequency shaping, modulation, noise and delay. Whether you want to accurately replicate a microcassette tape running at 1.2cm/s, or you want to drive a mastering grade tape machine with strange distortion shapes into a high feedback delay engine, Tape Pro is the plugin for the job. Saturation The saturation module is the first part of the signal chain within Tape Pro. It’s very flexible as it isn’t restricted to the traditional sound of tape and can be used to tune into your desired distortion sound. The module has 5 user parameters: Type, Drive, Asymmetry, Hysteresis and Remanence. The types of saturation on offer are: Tape, Digital, Rectify, Half-Rectify, Sine & Smooth. Response The response module within Tape Pro models the dynamic frequency response of tape. This can bring warmth, presence, or even jarring qualities to your audio - this is entirely subjective of course! The module has 3 user parameters: Type, Low Pass & High Loss. Tape Pro includes the following impulse responses: Cassette Type 1, Cassette Type 2, Cassette Type 4, Worn Copi-Delay, New Copi-Delay, Mod Copi-Delay, Master SA812, Master TM15, Microcassette 1.2cm/s, Microcassette 2.4cm/s, Semi-Pro RB77 7.5ips & Semi-Pro RB77 15ips. Tape Pro also includes Minimum Phase (MP) versions of the IRs listed above (not including the copi-delay versions). If you are using Tape Pro in parallel, on a bus or on a send, we recommend that a minimum phase IR is used. (For more information on this please see the explanation in the manual available from our website). Noise The Noise module applies real, sampled tape noises to the signal chain. The module has 4 user parameters: Type, Pre/Post Delay, Gain & Crosstalk. The noises included are the same as listed above in the response module. Wow & Flutter The Wow and Flutter module emulates the natural irregularities in the physical medium of tape. Wow recreates the low speed fluctuations of tape speed, while Flutter recreates the high speed fluctuations. The modules have 10 parameters in total. Wow: Depth, Sync, Rate, Mod, Sync x2 and Mod Rate. Flutter: Depth, Rate, Mod, Mod Rate. Delay The Delay module is an emulation of an analogue tape delay machine. The module has 11 user parameters: Dry, Wet, Time L, Time R, Feedback L, Feedback R, Portamento, Enable, Initial, Sync and Link. Tape Pro is both a stand-alone application as well as an AUv3 plugin, meaning it works within iOS and iPadOS hosts such as GarageBand.

Apple App Store
付費
音樂

商店排名

- -

Euclidean AUv3 Sequencer

Euclidean Sequencer is an alternative incarnation of the classic step sequencer that has become very popular in the modular realm. It is based on Euclidean rhythms developed by computer scientist Godfried Toussaint in 2004. Euclidean rhythms have their roots in Greek mathematician Euclid’s algorithm, which involves using the greatest common divisor of two numbers to place hits in a sequence as evenly as possible across a set timing divisions. In practice this is actually simpler than you might think, and Euclidean Sequencer is a great way to auto generate complex musical sequences with no prior knowledge of how it actually works. Euclidean Sequencer is an AUv3 plugin that can be loaded inside any popular host application that has flexible MIDI routing. You can define up to 4 Euclidean rhythm parts, each part is referred to as a band. The bands are labelled A-D and colour coded RED, ORANGE, GREEN and CYAN. Together these 4 bands create a pattern, and you can create up to 16 seperate patterns per song patch. Since each band can specify its own note sequence and output MIDI channel, you can create some quite sophisticated rythms patterns, driving 4 seperate instruments at once. Even better you can seamlessly switch patterns to create even longer evolving sequences. Patterns follow a specified key, scale, or defined chord. You can even use MIDI input to automatically make note sequences conform to the currently playing chords. Please note: This is an AUv3 plugin instended to be used inside your favourite host DAW such as AUM, Cubasis, Loopy Pro etc. It will work with any app that has flexible MIDI routing. Features 4 Band Sequencer 16 Patterns per patch. Up to 64 events per band. Seamless pattern transitions. Output Port and Channel control. Per Band and Global speeds. Randomize function with varying complexity. Supports note Probability. Reverse and PingPong modes. MIDI Chord recognition. Latch mode. 4 Band Velocity Mixer Controller support. Gate Mode. AUv3 Compatible.