DIMLITE pro commissioning 與 Sci-Lab 使用情況與統計
The DIMLITE pro commissioning app has been specially developed to help make commissioning the DIMLITE pro lighting control system intuitive. The DALI-2-based, scalable lighting control system for small to medium areas of application encompasses a wide range of functions – from simple switching on and off and dimming/brightening to daylight linking – even with Tunable White lighting – and individual lighting scenarios.
Each system supports up to 64 DALI 1 or DALI 2-based LED drivers and 16 input devices such as sensors or momentary-action switches. A single DALI LED driver or control device can therefore belong to several groups and thus various scenes.
The app is so intuitive to use, commissioning can be completed in just four simple steps. A particularly practical feature is Bluetooth, which enables unlimited use of the app even in offline mode.
Step 1: Create
In the first step, the new project is created. The basis for this can be either a new floor plan or a cloned layout. Luminaires are grouped and planned with corresponding light scenes.
Step 2: Connect and identify
Once the DIMLITE pro commissioning app is connected to the DIMLITE pro application controller, the system components (e.g. LED drivers, sensors or switches) in the app are automatically addressed. Easy device identification with the single touch of the device icon or single press of the switch push button.
Step 3: Plan
Using drag and drop, system components such as luminaires, sensors and momentary-action switches can now be placed in the floor plan and assigned to the various groups.
Step 4: Configure
The desired functions can then be defined and assigned. Finally, the project can be PIN-protected.
Completed projects and templates can be shared or copied and pasted to other projects. An over-the-air update ensures that the software is always up to date.
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
一、Basic Description
1、This software is mainly used in the digital experiment of primary and middle schools, including physical, chemical and biological experiments.
2、To work properly, the software needs to be used with sensors and bluetooth transmitter modules (sensors are connected to bluetooth launch modules). The sensor data is sent to the receiving end of the iPad or iPhone via a connected bluetooth module.
3、The software operates on portable mobile devices such as iphone or ipad, which has bluetooth low power consumption of BLE 4.0. The software can actively detect and connect bluetooth devices, real-time data collection, analytical sensor data, digital、graphic display digital and graphic display, with functions such as plug and play, automatic recognition ( sensor ), parallel acquisition, combination drawing, free coordinate, line analysis ( fitting, integral, etc. ), table record, add variables, formula, table data drawing, etc.
4、The overall design of this software adopts the Qt5.12.0 technical framework and Objective-C mixing method.
二、Use Instructions
1、Access the Bluetooth transmitter module to the sensor , turn on the power on the Bluetooth transmitter module, and then the indicator light is on.
2、Start the software on the ipad or iphone.
3、The software initial startup interface is QR code scanning interface. The ID information of the device can be automatically scanned and displayed by a QR code that is pasted on the target bluetooth module in the various bluetooth devices that are enabled, which can support scanning of 4 bluetooth modules ( that is, up to 4 sensors at the same time ),after the scan is completed, click start experimental button start scanning, discovering, connecting bluetooth equipment, sensor data transmission, data display and analysis.
For easy control, it is recommended that the software be installed on the device with a screen of 4.7 inches and above.
Please ensure that the operating system version is iOS 11.0 or above.
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
DIMLITE pro commissioning VS. 
Sci-Lab12月 19, 2024