RA660 mission control 與 Altimeter & Compass - TresKit 使用情況與統計

RA660 Navi mission control The newly designed RA660 mission control app connects your RA660 Navi XL to your Smartphone. Register your new cleaning robot directly in the app and get full control over the cleaning process and additional equipment like the KUKA carla_connect charging station, no matter where you are. Keep your cleaning records stored The RA660 Navi XL cleaning robot sends all important information about its cleaning cycles directly to your smartphone. There you can display the cleaned zones as a map and filter them by date, location or cleaning status. Notifications such as completed cycles etc. are sent directly to your device and displayed as push messages (if enabled). Command your Robot Start, pause, stop and plan your cleaning tasks directly from your mobile device via the Mission Control App. Simply send the robot back to the charging station and start the charging process with the optional KUKA Charging Assistant at the touch of a button. Choose between an autonomous and a manual cleaning mode. The autonomous mode allows you in combination with the docking station to change water and charge the battery fully automated. The charging and refilling cycle is performed simultaneously in a safe process. In addition, you can monitor the recharging process with live data in the RA660 Navi mission control. Simple setup and connection You can connect as many RA660 Navi XL and KUKA charging assistants to your Cleanfix Account as you want. The initial setup is done simply by scanning QR Code of the corresponding devices. *The described features are only available with the latest Cleanfix cleaning robot RA660 Navi XL.