KMG-Lite 與 Hörmann BlueControl 使用情況與統計
KMG-Lite app is the mobile supplement to the force measuring device KMG-Lite by GTE and documents the annually prescribed force measurement on doors and gates. A KMG Lite device with Bluetooth module is required for using the app. The app loads the measurement data and displays it as a graphic. Together with the order information, a result log is created, which can be sent immediately as a PDF file by e-mail. With location detection enabled, the log contains the location data as a map or as a QR code. The app also works offline and without location access.
Very easy handling:
1.) Turn on the KMG-Lite and connect
2.) Enter company data and logo
3.) Start measurement and save it
4.) Enter order data and save it
5.) Send documentation
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
With the Hörmann BlueControl app you can carry out Initial start-up and maintenance work on BlueControl-compatible controls.
A Bluetooth connection is established between the end device and the control.
If a connection is established to a control that was not taught in, you can configure all menu and parameter settings simply and clearly with the app.
If the control has been taught in, you receive all important information such as diagnostic data, cycles, operating hours, etc. at a glance and can carry out maintenance work.
Functions of the BlueControl app:
- Connection to a control by scanning a QR code, or by selecting a specific control
- Connection between the end device and control via Bluetooth. No Internet connection is required.
- Menu and parameter settings of the control via app
- Creating templates for the current menu and parameter settings
- Managing all saved templates
- Sharing templates with other people
- Resetting maintenance intervals
- Reading out diagnostic data
- Performing a fault analysis
- Creating and sending reports on all relevant control information via e-mail
- Apple App Store
- 免費版
- 公共設施
商店排名
- -
KMG-Lite VS. 
Hörmann BlueControl3月 19, 2025