Function Generator vs Sound Spectrum Pro Kullanım & İstatistikleri

Dual channel function / waveform / signal generator for the speaker / headphone audio output. Output is 16 bit for each left and right channels and at 44.1kHz. Output will depend on your device hardware. Some device hardware may may filter out the DC bias and low frequency signals. At high frequencies, the waveforms will be distorted due to limited number of samples for each waveform (for example at 4.41kHz, a sine waveform will be approximated by only 10 points). Therefore this is for fun/educational use, for critical applications use a real calibrated function generator. Left and Right audio channels can be assigned to either channel 1 or channel 2. Sine, Square & Triangular waveforms. Frequency range from 1 mHz up to 22 kHz. Amplitude as percentage 0-100%. Set duty for square waveforms or skew triangular waveforms to get saw waveforms. Offset the phase of waveforms. Sweep frequency or amplitude (Single, Repeat & Bounce modes). Amplitude Modulation (AM). Frequency Modulation (FM). Burst mode for a specific number of waveforms (1-10000). White noise & pink noise Generator. Pink (1/f) noise falls of at ~3dB per octave between 43 Hz and 44 kHz. Memory slots to save & recall channel configuration. Select values with spring slider or number pad. More detailed explanation available on website

Google Play Store
BOŞTA
Müzik ve Ses

Mağaza Sıralaması

- -

Sound Spectrum Pro

RTA (Real-Time Analyzer), FFT (amplitude display driven by Fast Fourier Transform), calibration, signal generators... Everything is included, bundled in a friendly interface with many on-screen controls and smooth real-time display. == Features == + FFT (amplitude) and RTA (octave, 1/3 octave, ... down to 1/24 octave). + Sound pressure level dBA, dBC, and dBZ. + Noise Criterion and Noise Rating in octave RTA. + Equivalent continuous sound level LAeq, LCeq, LZeq, LAeq15, LAeq60. + Impulse response and RT60 measurement. + Large font SPL + LEQ meter. + THD+N Total Harmonic Distortion plus Noise + Lightning-fast FFT with size from 16k to 1M, providing frequency resolution of 0.05Hz directly and 0.01Hz with downsampling. + Sample rate of 48kHz, if supported by the device. + Many window functions to choose from. + Logarithmic or linear frequency axis. + Peak and valley hold with adjustable decay. + Highest peak display + Adjustable exponential smoothing. + Easy pan (drag) and zoom (pinch). + Measurement cursors, also used for setting frequency of signal generators. + File load/save and full calibration capability, for accurate SPL readings. + Signal generators: tone, white noise, white sweep, pink noise, pink sweep, pink octave, pink 1/3 octave. + Synchronous measurement mode (including frequency sweep) for clean and fast spectrum analysis. + Loopback mode to try out signal generators and window functions. + Sharing and printing of screenshots. + No ads!