LectroRM vs Wisycom BT Kullanım & İstatistikleri

Controllable Settings: (*Some or all of the settings may not be supported by your particular transmitter) - *Audio Level - *Frequency - Sleep Mode - Lock Mode - *Power Output - *Low Cut Filter - *LED On/Off - *Record/Stop Features - Simplistic design for fast and easy use - Sounds are generated dynamically, not loaded from memory - Volume control on each page for easy access *Not all remote control tones are supported by every Lectronsonics device. Lectrosonics® SM transmitters must be configured to accept remote control tones. Hold down arrow while turning on the transmitter. Then select "rc on". The original SM requires firmware version 1.5 (released 12/05) to respond to the remote. The firmware version number appears upon turning on the unit. Any tones properly received but not supported will be met with "---------" response on the transmitter screen. Lectrosonics® is a registered trademark of Lectrosonics Inc. Lectrosonics Inc. does not provide support for this app.

Apple App Store
Ücretliler
Araçlar

Mağaza Sıralaması

- -

Wisycom BT

Scan Wisycom devices broadcasting general information about their status and manage your gears. Launch the App to monitor and control parameters including: remaining battery, channel name, RF and audio levels, channel group, frequency and more. Thanks to the multiple device control is possible to apply one or more commands to all connected devices simultaneously. The device must have Bluetooth enabled in order to connect with Wisycom devices. ◆ Supported devices: - BFLT/R-1 firmware v1.1.0 or higher - MTP61 firmware v1.0.0 or higher - MTP60 firmware v1.6.0 or higher - MCR54 firmware v1.23.0 or higher - MCR54-DUAL firmware v1.23.0 or higher Thanks for choosing Wisycom BT App, we’re constantly working to optimize the app and offer the best possible experience.