ISD Link vs SpeedyBee App Kullanım & İstatistikleri
ISD Link is an APP specially designed for smart device interaction.
1. ISD Link does not have an account registration function, and all data on the device is saved locally and will not be uploaded to remote servers. It promises not to collect user information.
2. During use of ISD Link, Bluetooth needs to be turned on for device scanning and connection.
3.ISD Link supports the following devices: TESTV co-branded model PB25DW, TESTV co-branded model PB40, MAG20, PB70W, PB40, PB50DW, PB10DW, PB25DW, ZIP, Power200 series, EDGE, NP2GO, 608PD, A8Air, A4Air, Air8, C4Air, B80 /B60, K4, X16, K2Air, NP2Air, LP2Air.
- Apple App Store
- BOŞTA
- Araçlar
Mağaza Sıralaması
- -
SpeedyBee is an Appllication for Flight controller parameters settings.
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.
Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0
System Requirements : iOS 12.0+
Instructions for use：
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.
- Apple App Store
- BOŞTA
- Araçlar
Mağaza Sıralaması
- -
ISD Link VS. 
SpeedyBee AppOcak 5, 2025