- Ana Sayfa
- Uygulama Analitiği
- AddressIT
- AddressIT Vs. W-BACnet
AddressIT vs W-BACnet Kullanım & İstatistikleri
AddressIT is a mobile app designed to help you set IP addresses for multiple controllers from one
location.The AddressIT app supports OptiFlex™, OptiCORE™, and TruVu™ controllers, but only IPv4 addresses.
There is no limit on the number of controllers you can address.
- Apple App Store
- BOŞTA
- Araçlar
Mağaza Sıralaması
- -
The W-BACnet app has arrived! Upgrade firmware for LumenRadio W-BACnet devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which BACnet MS/TP address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-BACnet app requires W-BACnet firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
- Apple App Store
- BOŞTA
- Araçlar
Mağaza Sıralaması
- -
AddressIT ile W-BACnet için sıralama karşılaştırması
Son 28 gündeki AddressIT sıralama trendini W-BACnetile karşılaştırın
Rank
Mevcut veri yok
AddressIT vs. W-BACnet ülke karşılaştırmasına göre sıralama
Son 28 gündeki AddressIT sıralama trendini W-BACnetile karşılaştırın
Gösterilecek bilgi yok
Ücretsiz deneme sürümümüzü kullanarak istediğiniz siteyle karşılaştırın
AddressIT VS.
W-BACnet
Aralık 19, 2024