Bark Filter vs AltiSpace 2 Kullanım & İstatistikleri

Bark Filter - Critical Band Analyser/Filter/Compressor The multi band filter in Bark takes the approach to match the reception characteristic of the gate where all sounds must pass through: the human ear. The ear behaves as if it contains a bank of filters, each filter passing frequencies within their respective critical band. Two tones apart more than the frequency dependant critical bandwidth are perceived as separate tones. For this reason Bark contains a filter bank with 27 very steep bandpass filters matching the critical bandwidth characteristic of the human ear. In fact, the human ear have also its own built in multi band compression system which are based on the critical bands. Why the name Bark ? The Bark scale is a frequency scale on which equal distances correspond with perceptually equal distances. Above about 500 Hz this scale is more or less equal to a logarithmic frequency axis. Below 500 Hz the Bark scale becomes more and more linear. Multiband compressors can act differently on different frequency bands. The advantage of multiband compression over full-bandwidth compression is that unneeded audible gain changes or "pumping" in other frequency bands is not caused by changing signal levels in a single frequency band. Bark can act both as single band compressor and with up to 27 bands in multiband mode by linking critical bands. The linear phase filter bank with its steep filter slopes can be used for unusually pronounced filter effects too... Features: • Multi band dynamic range compressor with up to 27 bands • Variable number of compressor bands (1..27) • Threshold/Ratio Attack/Release and Makeup Gain • Linear phase precision filters for maximal transparency • Real time pre/post processing calibrated spectrum analyser • AudioUnit for AUv3 compatible hosts. • Inter-app audio compatible effect. • Audiobus 3 compatible with state saving. • Low latency live usage with mic and headphones. • Audio recorder

Apple App Store
Ücretliler
Müzik

Mağaza Sıralaması

- -

AltiSpace 2

AltiSpace is a convolution reverb app with advanced controls that provides realistic sounding natural acoustic space or vintage reverb devices for any track or mix. A convolution reverb takes a captured sample (called an impulse response) from a real-world space or real hardware and uses this to digitally simulate the reverberation of that space or device down to the last detail and nuance. Because it is sampled, not synthesized, convolution reverb is known for its stunning realism, and it is widely considered to be the best type of reverb. However, unlike the more common algorithmic reverbs, convolution reverbs usually does not have much control over the reverberation process. But AltiSpace, in addition to the ability to load your own impulse response files and a built-in library of the most interesting vintage reverb device presets, has advanced settings such as EQ, gate, ducking, modulation and more. You can change the original impulse response parameters to something completely new and then save it as a new preset. This app has an easy-to-use user interface, where all the main controls are located on the single screen, and it is ready to use right out of the box, even without additional settings. And at the same time, you can easily change the parameters of the impulse responses from the built-in library to create your own sound. App features: - Ability to import your own impulse response files. - A large built-in library of presets from the most interesting hardware reverbs. - Convenient preset manager with the ability to group and search presets. - Presets can be marked as favorites for display in the favorites group. - Supports MIDI controllers (also Bluetooth) with learn or manually assign mode. - Reverb can work with a stereo or mono input and convert it to stereo. - Add dynamic noise before reverb for a more natural sound. - The gate allows you to turn on the reverb when the threshold is exceeded. - The ducking allows you to turn off the reverb when the threshold is exceeded. - Sets the minimum reverb level for Gate and Ducking modes. - Equalizer with high and low cut filters in chain before or after reverb. - Changing the time (length) of the current impulse response. - Possibility to set a fade out point for a smooth end of the impulse response. - Sets the pre-delay time of the signal before reverb. - Experimental feature to change the pitch of the impulse response. - Amplifying early or late reflections. - Adjusts the stereo image before the reverb. - Haas effect for adding stereo space to a mono signal. - Sets the depth and frequency of modulation the signal before reverb. - Mixing dry / wet signal and adjusting the output level. - Input and output level meters. - Indicators of possible input clipping for standalone. - Prevents any output clipping for standalone. - Built-in full description of all controls. Demo: https://www.youtube.com/watch?v=WBHxgjkGCoU https://www.youtube.com/watch?v=GLNi9wHaGew https://www.youtube.com/watch?v=A3RPopor9gI AltiSpace is a universal application for iOS and macOS. It can work on iPhone and iPad as well as Mac / MacBook with M1 chip (and later). AltiSpace works on iPhone and iPad standalone, as an Audio Unit or Inter-App Audio module, and supports Audiobus and Ableton Link. On macOS, AltiSpace can works both as a standalone application and as an Audio unit (AUv3) with DAWs and audio unit hosts like Ableton Live, Logic Pro, GarageBand, MainStage, Cockos Reaper, Plogue Bidule, and other hosts that support AUv3 plugins. All application features are available on iOS and macOS, including MIDI support (with a midi learn option) and audio unit parameters. AltiSpace has a built-in detailed description of all parameters also available as PDF file on application site. You can find more information on AltiSpace and other experimental and audio processing apps at: https://motion-soundscape.blogspot.com