T Beam против Piles Capacity Использование & Stats

Designing a Reinforced Concrete Flange T Beam. Applied moment and forces: Bending moment, Shear and Torsion. What this application can do: • Provide the required reinforcement in Tension and Compression zone. • Draw a Section of Beam with all required reinforcement. • Check how many layers required in Tension and Compression Zone. • Draw Strain Distribution Diagram and provide ε for each rebars layer. • Get the Crack width. • Get the Deflection. • PDF report.

Apple App Store
Платный
Продуктивность

Рейтинг магазина

- -

Piles Capacity

Mobile Design Tool for Cast-in-Place Bored Piles Piles Capacity has a modern design which priorities speed and simplicity. Up-to-date estimation engine documented in a brief and straight-forward online reference manual ( http://www.hetge.com/PCref ) Featuring a unique soil profile builder, Touch Soil™. Visually build required soil profile with the ease and convenience like never before. Works with either Metric (mm, metres, ton, kN, kPa)or Imperial (inch, feet, psi, psf, kips) unit systems. Graphs depth vs. friction, tip and allowable bearing capacities with optional correction of tip resistance with respect to underlying strata. Prepares detailed report for bearing values of each layer with average effective stress, skin friction and tip resistance at top and bottom of layer. Uses advanced soil parameters for more precise estimation such SPT, cohesion increment with depth, diameter reduction in rock as well as partial safety factors for skin friction and tip resistance.