W-Modbus vs EasyX2 Uso e estatísticas
The W-Modbus app has arrived! Upgrade firmware for LumenRadio W-Modbus devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which Modbus RTU address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-Modbus app requires W-Modbus firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
- Apple App Store
- Gratuitos
- Serviços básicos
Ranking da Loja
- -
EasyX2 only works with Vector X2 controllers (TCX2, TCI2, TRI2, SxC2, SRD2, ... ) with Wi-Fi or Ethernet connection. The app scans the (W)LAN for connected controllers and list the devices. Each controller provides an integrated web interface which can be accessed directly using EasyX2. The X2 commissioning of the controllers need to be done in advance using the software "EasySet".
The WLAN settings can be entered in order to connect a new X2 Vector Controller into the existing WLAN.
- Apple App Store
- Gratuitos
- Serviços básicos
Ranking da Loja
- -
W-Modbus VS. 
EasyX227ezembro d, 2024