FixtureTester Lite vs ArtnetControl Uso e estatísticas

Fixture Tester is an application to test all the fixtures in the network using Art-Net or sACN. Fixtures can be added manually or an already existing patchlist from ELC Lighting's dmXLAN can be imported. When there are fixtures selected, the associated macros like 'Lamp on' can be run on the selected fixtures. To test whether or not the fixtures have the correct address, there is the address test. This test homes the selected fixtures one by one automatically at an adjustable speed. To test the various functions of the selected fixtures there is the parameter test. This test first homes all the selected fixtures. Then it runs all parameters from 0 to 255 and back, one by one. Custom libraries and patchlists can be downloaded in Fixture Tester with iTunes, ELC lighting's dmXLAN v4 or FileUploader, which is a free download at www.bartvanstiphout.com. Patchlists can also be shared using Airdrop, mail or other applications. Using an ethernet node, the universes can be converted to a Dmx signal. Since version 1.7 it is also possible to program the dmXLAN Nodes from ELC lighting. Full RDM control of all fixtures which are connected to a Node from ELC lighting! ** LITE VERSION LIMITATIONS ** - A maximum of 10 Fixtures can be tested simultaneously - Programming an ELC lighting Node or Switch port is disabled, but you can see how it works - Changing properties of an RDM Device is disabled

Apple App Store
Gratuitos
Produtividade

Ranking da Loja

- -

ArtnetControl

The ArtnetControl app is one of the most comprehensive Art-Net capable app's available for iOS. Now lighting technicians and riggers can quickly check and position conventional fixtures, and monitor and troubleshoot Art-Net networks. All from your iPhone or iPad! You don't have to drag your lighting desk to the stage anymore during setup, just to put a six-bar in position. Take controle right from the Layer-construction or platform! Or what about the guessing-game or the tedious troubleshooting when node's and fixtures aren't doing what you would like them to do? With ArtnetControl you can see exactly what is happening on your network. Check what devices are connected, and find patch faults or merging errors with ease. CONTROLLER The Controller tool allows you to transmit ArtDmx. It is intended to be used as a riggers remote, to check or position your conventional fixtures. The whole workflow is specially designed for quick access and handling. For example you can set defaults and input from your last command is remembered so you only have to enter changes. There are also function key's provided for easy manipulation of you last given command, for instance to shift highlight to another set of parcan's You can enter universes, channels and value's in any order and combination. Simultaneous transmission up to 20 universes is supported, not necessarily sequential. A modus selection between 'single' and 'multi' is provided to choose whether you would like only the last entered command to be activated, or all commands to be handled as mutations upon each other. At this moment there isn't any functionality present, specifically designed for intelligent fixtures. DISCOVERY TOOL This tool does exactly what the name suggests; it discovers Art-Net compatible devices in your network. It will show you the name of discovered devices, what type of devices it is and it's IP address. There's also an details page to show you about everything there is to know about your node's and fixtures (ports, universes, ip, actual dmx, manufacturer, connection test, ect.) ART-DMX VIEWER Now you can see exactly what is going on on your network. This tool shows which universes are being transmitted by what controller. And if you select a universe, even channel information is shown. No more guessing which controller is causing problems with the Dmx merge. But also very handy to check your universe and channel patch.