Regin:GO vs W-Modbus Uso e estatísticas
Regin:GO is a powerful tool to use when commissioning Regin devices with Bluetooth, currently Regio RCX and SCS-S2
You can easily identify and configure devices just by being close.
This is made possible via the Bluetooth connectivity.
You can also upgrade firmware whenever new functionality is added by Regin.
When you are connected a steady blue light from LED on the device will appear.
You can also use the LED light to identify units from a distance when pressing “identify” in the device list.
First the LED on the unit selected blinks in yellow for some seconds.
See screenshots for more details.
- Apple App Store
- Gratuitos
- Serviços básicos
Ranking da Loja
- -
The W-Modbus app has arrived! Upgrade firmware for LumenRadio W-Modbus devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which Modbus RTU address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-Modbus app requires W-Modbus firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
- Apple App Store
- Gratuitos
- Serviços básicos
Ranking da Loja
- -
Regin:GO VS. 
W-Modbus17ezembro d, 2024