Cableboss vs R1+R2 Zs Ze Calculator Uso e estatísticas
Cable stays exactly where you left it.
Why electricians need the Cableboss app
There is no easy way to secure cables between joists.
No simple way to log and record the location of cables.
Cables can - and do - get moved or lost, resulting in wasted time and money.
Most electricians make three visits to fit downlights in case they have to cut holes and carry out remedial works prior to plastering.
Benefit of the Cableboss app
Fix - Position cables accurately.
Record — Log positions on the Cableboss app.
Recover - Use the app, find the cables and fit lights in two visits, safe in the knowledge that the cables stay exactly where you left them!
Saves time, money and improves efficiency.
How the app works
Create a site - This is the home address you are fitting lights/cables.
Create a room - This is the specific rooms you are laying cables.
Add pictures - Add pictures and notes on the Cableboss app.
Share - Share pictures with notes and descriptions with anyone.
Repeat - Repeat the action and save yourself a whole lot of time and money.
Download the Cableboss app today
- Apple App Store
- Gratuitos
- Serviços básicos
Ranking da Loja
- -
Calculates R1+R2, Zs or Ze, input two values to calculate the third.
- Calculate: Zs
- Calculate: (R1+R2)
- Calculate: Ze (not recommended)
A quick and easy way to calculate R1+R2 or Zs.
Check your measured R1+R2 or Zs values with this handy R1+R2 calculator or calculate a value from the other two known values to verify actual measurements obtained.
Easily calculate the earth loop impedance (Zs) from the R1+R2 and Ze values, also calculate the R1+R2 value from the Zs and Ze values.
+ Check you measured R1+R2 readings
+ Check your measured Zs readings
+ Validate or verify your Ze (not recommended)
Although this app allows the calculation of the Ze value, the Ze value should not be calculated. The Ze value should be obtained by actual measurement or by inquiry to the regional electric company. It is good practice to directly measure R1+R2 and Zs values rather than calculating them.
How to calculate Zs:
1) Enter the Zs and R1+R2 values.
2) Tap calculate.
How to calculate R1+R2:
1) Enter the Zs and Ze values.
2) Tap calculate.
How to calculate Ze:
The Ze value should not be calculated, instead obtained by direct measurement or by inquiry to the electricity network company.
- Apple App Store
- Gratuitos
- Serviços básicos
Ranking da Loja
- -
Cableboss VS. 
R1+R2 Zs Ze Calculatorjaneiro 1, 2025