feiffer LMS vs BERGMANN Setting Uso e estatísticas
Accurate and easy loss measurement.
This app serves to calculate grain loss during the cutting and threshing. It helps you to avoid big losses, to calibrate the electronic loss control and to set up your combine harvester optimally. To use this app you need the LMS KIT (Loss Measuring System) from feiffer consult. And this is how it works: one to three loss pans can be fixed to the combine with flexible magnetic holders (possible over the entire working width). The test panels are automatically cast by remote control. Threshing losses are detected. A blower facilitates the separation of grain losses. The grains are weighed by means of a pocket scale.The result is input into the feiffer LMS app. An accurate loss value is calculated on the basis of the specific yield and the combine harvester parameters.
This app is usable universally for all grain crops and all types of harvest combines.
The result is calculated in %, kg/ha and €/ha.
This app is free and does not require any in-app purchases.
- Apple App Store
- Gratuitos
- Produtividade
Ranking da Loja
- -
With the BERGMANN setting app it is possible, to calculate the target speed for the scraper floor or for the drive speed for the BERGMANN-spreader depending on the application rate.
All current BERGMANN-spreaders are available.
Typical material like lime, manure, compost or others can be chosen from the integrated product-database. Basic properties (density, dosing wall height…) will be loaded and used automatically. After choosing the material and application rate, the App will show how much nitrogen, phosphate and potassium will be spread per hectare. Also, the App offers an easy tool to check the maximum amount. New material with all properties can be created by the user and existing material can be changed.
The next highlight of this app is an integrated tool to calibrate the speed of the scraper floor for spreaders without electronic control unit. Thanks to a Start and Stop button, it is possible to measure the speed of the scraper floor. A simulation shows the turning shaft with the calculated scraper floor speed. Through increasing or decreasing the oil-quantity (liter per minute) of the scraper floor, you´ll get the correct speed. On the other side, the tool shows also the actual speed of the scraper floor, so that this speed can be taken as the setting and a new drive speed will be calculated.
- Apple App Store
- Gratuitos
- Produtividade
Ranking da Loja
- -
feiffer LMS VS. 
BERGMANN Settingjaneiro 6, 2025