sqsl Canvas vs ShiftBud Generative MIDI AUv3使用状況と統計
sqsl Canvas is a touch-friendly control voltage playground for owners of DC-coupled audio interfaces*. Designed to be "hardware-feeling", sqsl Canvas transforms iPad into flexible and user friendly Eurorack module alternative.
Currently there are three modes (modules) available:
---
1. SOURCE mode (free):
- 8 touch strips for setting voltage level sent to outputs (1-8);
- 8 frames (memory slots) for storing level settings;
- crossfading and switching between frames with optional external CV controls;
- levels randomization with optional external CV control (gate);
- global gain (inverting) with optional external CV control.
Output voltage range is switchable: +-5V or +-10V (sliders range is 0-10V).
Input voltage controls are clipped to +-5V range.
---
2. RISE & FALL (available as In-App Purchase):
Envelope/LFO generator.
- 8 output channels (limited to 2 channels in free demo mode);
- 4 assignable trigger inputs (to any output channel);
- CYCLE control for every channel (LFO mode);
- TIME parameter controls duration of generated envelope (or LFO cycle);
- SHAPE parameter balances rise and fall section of generated envelope;
- LEVEL parameter controls channel's output level (reversible into negative voltage);
- DENSITY parameter controls random skipping/muting of envelopes (or LFO cycles);
- channel parameters (time, shape, level and density) can be modulated by internal randomiser with adjustable range (randomisation happens when envelope or cycle restarts);
- current level signal is visually represented: blue for negative and red for positive voltage.
Envelopes are generated in response to triggers and are set to always finish their full length cycle disregarding trigger/gate length. If trigger is detected while envelope is in Rise state, it is ignored. If trigger is detected while envelope is in Fall state, envelope will switch to Rise state and continue from current level. Output voltage range is +-5V.
---
3. DIVIDED (available as In-App Purchase):
Clock source and divider.
- internal clock source with frequency control (RATE touch strip) or CV input 1;
- 8 output channels (limited to 2 channels in free demo mode);
- per channel DIVISION, SWING (delay on every second pulse), GATE (gate duration in % of source clock cycle), DENSITY (probability) parameter adjustable by touch strips;
- 8 FRAMES for storing above channel parameters;
- FRAMES can be switched manually or by CV input 3;
- RESET (quantised to source clock) to aligned all division counters to their max values;
- RESET can be triggered manually, by CV input 4 or on FRAME change;
- ROTATE control to reassign channels/outputs (touch strip or CV input);
- MUTE for every channel (with option to FOLLOW or ignore rotation);
- option to output source clock persistently on last channel (ignoring rotation, mutes etc).
Gates level is fixed at +5V.
Input voltage controls are clipped to +-5V range.
*sqsl Canvas is designed to work with DC-coupled audio interface and will output DC signals on channels 1-8 (or 5-12, 9-16) - make sure no speakers or headphones are connected to those channels. For more information visit https://www.seqsual.com/canvas.
- Apple App ストア
- 無料
- 音楽
ストアランキング
- -
ShiftBud is a random looping generative MIDI sequencer based on the eurorack module Turing Machine by Tom Whitwell.
It works based on the 16-bit shift register chips where it shifts its value on each sequencer step. However, you can lock the sequence in a desired length if you fully rotate the chaos knob to the left or right. If you introduce low amount of chaos, then the sequence "flips" occasionally and generate beautiful sequences. You can also produce random values if set higher amount of chaos.
The MIDI note generation can be in more than 110 scales plus your custom ScaleBud 2 scales. You can set the octave range, velocity or velocity randomness as well.
You can set the higher and lower bounds on MIDI Control Change generation as well as the CC number you want to control. It's very useful on modulating synth parameters and you can even modulate the ShiftBud's AU parameters as well. You can also set a ramping value for a smoother change. With the 0% ramping, you can use it like a "sample and hold" module.
With the manual trigger function, you can use another sequencer or keyboard to trigger ShiftBud's next note.
You can create unlimited pattern pages on the lower left corner of the app and you can select the pattern with MIDI CC messages as well.
Please note that ShiftBud is a MIDI app. The standalone version has an optional internal synth where you can enable or disable on the settings menu. The AUv3 plugin requires an audio app for output. For the AUv3 functionality, it needs to be hosted within an app such as AUM, Loopy Pro, Cubasis, Logic Pro, Nanostudio, Drambo, or apeMatrix.
- Apple App ストア
- 有料
- 音楽
ストアランキング
- -
sqsl Canvas VS. 
ShiftBud Generative MIDI AUv312月 12, 2024