Display0183M vs WilhelmSK使用状況と統計

Display0813M is a customisable app for sailors for NMEA information on iWatches, iPhones, iPads and Macs and ActiveLook smart glasses. It provides a selection of over 30 sailing measurements from the boat’s NMEA network and polar tables. For each measurement the minimum and maximum values and a time series graph are available. The polars data is interpolated: instead of just the tabulated data points also intermediate wind and boat speed data is available based on (bi)linear interpolation. The Wind Display has all key sailing information in context aware analog format. It provides comprehensive wind and heading information in both analog and digital format. It is based on the sailing context: going upwind, downwind or towards a waypoint and enhanced by the polars data. Display 0813 connects to a NMEA 0813 Wi-Fi gateway such as B&G Vulcan, Zeus, GoFree or Yacht Devices NMEA 2000 Wi-Fi Gateway. The supported NMEA 0183 sentences are: - BWR: Bearing and distance to waypoint - DBS: Depth below surface - DBT: Depth below transducer. - DPT: depth of water. Note: the Settings/Install sensor offset is added to the value given unless it is received in the NMEA0183 sentence. - CGA: Global Positioning System Fix data - GLL: Geographic position - Latitude / Longitude - HDG: Heading magnetic - HDM: Heading magnetic - HDT: Heading true - MWD: undocumented, based on Vulcan 7FS data, wind direction, wind speed (both magnetic and true) - MTW: water temperature (Note: value is red as it is, the Unit is always displayed °C) - MWV: Wind speed and angle (both relative and apparent) - RMB: XTE, range to destination, bearing to destination, destination closing velocity . - RMC: Speed over ground - RSA: Rudder sensor angle - VHW: Water speed and heading - VLW: Distance travelled through water - VPW: Speed - measured parallel to wind - VTG: Course over ground (T or M), speed over ground - VWR: Wind direction (A), wind speed (A) - WCV: Waypoint closure velocity - XDR: air temperature (°C), water temperature (°C) and barometric pressure (mbar). - XTE: Cross track error The following data items ("measurements") are read from the NMEA data stream or derived from these and the boat's polar data.. - Waypoint direction (WP dir, °M) - Waypoint distance (WP dst, distance unit) - VMG waypoint (WP VMG, boat speed unit) - Cross track error (XTE, distance unit ) - Depth (Depth, depth unit) - Heading (Heading, °M) - Heading (Heading, °T) - Course (Course, °M) - Course (Course, °T) - Water speed (Speed, boat speed unit) - Speed over ground (SOG, boat speed unit) - Water temperature1 (Water tmp, °C) - Air temperature1 (Air tmp, °C) - Air pressure1 (Air pre, hPa) - Wind speed apparent (Wind Spd A, wind speed unit) - Wind angle apparent (Wind ang A, °) - Wind speed true (Wind Spd T, °) - Wind direction (Wind dir, °M) - Wind direction (Wind dir, °T) - VMG Wind (calculated) - Latitude (Latitude, DD°MM.mm’) - Longitude (Latitude, DD°MM.mm’) - Water Distance after reset (Wtr dst, distance unit ) - Total water distance (Wtr dst T, distance unit ) - Ground distance after reset (Grnd dst, distance unit) - Total ground distance (Grnd dst T, distance unit) - Velocity made good towards wind (Wind WMG, boat speed unit) - Heel (Heel, °) - Rudder (Rudder, °) - Boat target speed through the water (based on current polar table) - Boat speed of target speed (%) - Beat VMG boat target speed through the water - Run VMG boat target speed through the water3 - Leeway (Leeway. °). Calculated difference Course °T - Heading °T To get started, please see the user's guide at https://pbase.com/pekkal/display0183m. The Terms of Use are the standard Apple Terms of Use (EULA) https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
  • Apple App ストア
  • 無料
  • ナビゲーション

ストアランキング

- -

WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat. WilhelmSK works best wth Signal K Server . It can also connect directly to some devices: º NMEA 0183 over TCP or UDP. (from for example, Digital Yacht's Smart WLN10) º Any modern Navico (Lowrance, Simnet or B&G) GoFree MFDs º NMEA 2000 via Yacht Device's YDWG-02 º NMEA 2000 via Actisense W2k-1 º Victron Venus GX or CCGX º Victron VRM º Chetco SeaSmart Devices º Chetco HelmSmart RayMarine Auto Pilot Support (via node-server or the YDWG only) º View or change current mode (Standby, Auto, Wind, Track) º View current target heading or Wind direction º Change target heading or Wind direction º Acknowledge "Turn To Waypoint' Active Captain: º You can view Active Captain Points of Interest and review or comment on them. º Go to Settings->Appearance to show Active Captain Points of Interest on the maps. Alarms and Notifications º View list of current current alarms º Acknowledge RayMarine "Turn To Waypoint' * º Push notification support * º Setup server side alarms * º Set an anchor alarm with the push of a button * Navionics Maps If you already have the Navionics Boating application with an active subscription, you can now use the same Navionics charts in WilhelmSK. Ensure you are a registered user with Navionics and have a Username and Password. If you have not registered, go to the Navionics Boating App’s Main Menu, click on the top “Me” option and then click Login. In WilhelmSK click the login button on the bottom right of the map and enter your Navionics login information. Features: - Raymarine MFD: display and interact with a RayMarine MFD (discovered via Bonjour) - Fusion stereo (control zone volumes, source input, play, pause etc.) - Create a gauge for any value available via SignalK - Sophisticated anchor alarm (requires node server and signalk-anchoralarm-plugin) - Customize gauge display using SignalK meta.zones - Customize gauge range, min/max, etc. - Save custom gauges to node server or the cloud for use on other devices - Wind Angle gauges can optionaly be rotated so that they always point ot the bow of the boat, regaurless of device positioning - Place gauges by long pressing on a gauge and choosing a differnt one - Make a gauge full screen by double tapping - Multiple layout support. Create a differnt layout for Steaming, Sailing, Home Monitoring, etc. - Customize the nuber of pages and their layout - Manuall connection configuration synced accross devices via iCloud - Automatic connection selection based on current ip (usefull when Bonjour is not available and you have multiple boats) - Two themes, dark and light - Animated gauge needles - iPad Slideover and Split View support (Your gauge configuration can be customized for these views) - Connections can be configured to be refreshed manually or at a specific time interval - Design your own custom gauge templates - Share your custom templates via Air Drop, eMail, Text, etc. - Edit ApplyTV or other device layouts and templates remotely using your iPhone or iPad - Most gauges can be configured to be digital or analog - Enter the SignalK path and title for any gauge to show data not supported by default - Displays AIS targets in the Map views - Configure node server plugins inside of the app - IP and RTSP camera display * Some advanced features require signalk-server-node and special plugins installed. Setup Instructions at https://github.com/sbender9/wilhelmsk-node-server-setup
  • Apple App ストア
  • 有料
  • ナビゲーション

ストアランキング

- -

Display0183M対WilhelmSKランキング比較

と過去28日間の Display0183M ランキング傾向を比較 WilhelmSK

WilhelmSKWilhelmSK- -

ランキング

Display0183M 対 WilhelmSK 国の比較によるランキング

と過去28日間の Display0183M ランキング傾向を比較 WilhelmSK

業界別 ウェブサイトカテゴリー

ご利用可能なデータがありません

ナビゲーション

アプリ
上位の国
ランキング
- -
- -
#71

無料トライアルで任意のサイトと比較する

始める
Display0183M VS.
WilhelmSK

12月 26, 2024