BLE Terminal HM-10 vs iCircuit使用状況と統計

INTRODUCTION: - One-of-a-kind App that is used for scanning nearby BLE devices and also use for serial communication. - Control any Micro-controller that uses any BLE Module like HM-10, BT-05 (based on Texas Instruments CC254x) through your smart phone. -- This app can send and receive commands via BLE so you can debug your hardware problems easily. FEATURES: - Separate panels for sending and receiving data. - Custom your own buttons for frequent sending of same data. - Monitoring receiving data as ASCII or HEX. - Sending Data as ASCII or HEX. - Auto send commands at timed interval - Selection for \r \n at the end of sending data. - Send Log file of Received and Sent data. - Simple copy option in sent data just long press on data. - Keep Screen on/off option. - Remove Ads option. NOTE: - By default, Received data in ASCII format and It can be changed from top MENU. - By default, Data sent in ASCII format and It can be changed from long pressing of particular Button. - By default, \r\n will be sent on every sending data and It can be changed from long pressing of particular Button.

Apple App ストア
有料
生産性

ストアランキング

- -

iCircuit

iCircuit is the premier iPad and iPhone app for designing and experimenting with circuits and Arduinos. Its advanced simulation engine can handle both analog and digital circuits and features realtime always-on analysis. It is the perfect companion to students, hobbyists, and engineers. You use it as you would any CAD program: you add elements, connect them together, and set their properties. But iCircuit is unlike other CAD programs because it is always simulating. It's just like working with the real circuit. You do not stop to take a measurement or spend a lot of time configuring reports. Instead, you just play with the circuit as you normally would, with the power on! There are over 300 elements you can use to build your circuits. The app has everything from a programmable Arduino, to simple resistors, to switches, to MOSFETS, to digital gates. The app features a multimeter that you use to probe around the circuit to instantly read voltages and currents. If you want to see how a value changes over time, then you can add values to the built-in oscilloscope. The scope can simultaneously track many signals over time and features a touch interface to control the total time displayed and stacked and unstacked modes to easily compare signals. The scope can also display the Fourier transform of any signal so that you can see the performance of filters. Supported elements include: • Programmable Arduino using a subset of the C programming language • Programmable PIC controllers using assembly language or hex files • Signal generators, Voltage sources, Current sources, and Dependent sources • Resistors, Capacitors, and Inductors • Manual SPST/SPDT and DPST/DPDT Switches, Push buttons, and Relays • LEDs, Diodes, BJ Transistors, and MOSFETs, Thermistors • Triodes and tetrodes • Audio simulation with Speakers, Microphones, Buzzers, and LEDs • DC Motors and Servos • ADCs, and DACs • Logic gates: AND, OR, NAND, NOR, XOR • JK and D Flip-flops • 180 digital ICs from the 4000 and 7400 series • 78xx and LM317 voltage regulators • 7-segment and matrix displays • Antenna with simulated AM and FM signals You can also create sub circuits to introduce new elements and componentize your designs. No matter your skill set, you'll be playing with circuits in no time with iCircuit. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/