SidePilot vs SpeedyBee App使用状況と統計

This is the app for drone enthusiasts who wish to have a more portable ground station. Works with ArduPilot platform via WiFi, Bluetooth Low Energy or Cellular connection, including 3DR Solo. NOTE: You must have either WiFi, Cellular or Serial Bluetooth connection to your drone. User Manual is available at https://sidepilot.net/pdf/SidePilot-UserManual.pdf Features: • Supports ArduCopter, ArduPlane and ArduRover via MAVLink protocol. • Displays current drone location, with information such as altitude, yaw, pitch and roll. • ADSB integration to display nearby aircraft and provide warnings. • Create, edit and delete waypoints. • Audible alerts for important information. • Edit, save and load parameters. • Perform a Pre-Flight checklist with live weather information. • Low battery warnings and alerts. • View onboard video, and live stream it to YouTube. • Record telemetry logs and export for sharing. • Follow Me - Have your drone follow you using your devices GPS location, or visually with Object Tracking. • Orbit mode - Automatically orbit an object for a fantastic cinematic shots! • Grid Waypoints - Create a survey grid to fly • Tap to fly - Tap a location on the map to send your drone there! • Perform calibrations at the field. • And many, many more... Quick-start guide (Using a WiFi connection): 1. Turn on drone and connect using WiFi. 2. Start SidePilot, navigate to settings and select either WiFi UDP, TCP or 3DR Solo (as applicable). 3. If setting up WiFi manually, click on WiFi Settings and input the correct IP address and port that the MAVLink protocol is running over. 4. Go back to the main screen and press the connect button on the top right. The app will begin displaying information about the drone. If not, double check your WiFi settings. Please post suggestions and bug reports on the SidePilot Facebook page or via email to tom@sidepilot.net WARNING: Continued use of GPS running in the background can dramatically decrease battery life. Note: iPads without cellular do not have GPS capability unless tethered to a iOS Device with cellular, and even then it is poor and not suitable for navigation.
  • Apple App ストア
  • 有料
  • ユーティリティ

ストアランキング

- -

SpeedyBee is an Appllication for Flight controller parameters settings. Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight. Flight Controller Requirements: Betaflight firmware version ≥ 3.1.0 iNav FC version ≥ 1.8.1 Butterflight firmware version ≥ 3.1.0 System Requirements : iOS 12.0+ Instructions for use: 1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated  Bluetooth. 2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value. 3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.
  • Apple App ストア
  • 無料
  • ユーティリティ

ストアランキング

- -

SidePilot対SpeedyBee Appランキング比較

と過去28日間の SidePilot ランキング傾向を比較 SpeedyBee App

SidePilotSidePilot- -

ランキング

SidePilot 対 SpeedyBee App 国の比較によるランキング

と過去28日間の SidePilot ランキング傾向を比較 SpeedyBee App

業界別 ウェブサイトカテゴリー

アプリ
上位の国
ランキング
#197
- -
- -

ユーティリティ

アプリ
上位の国
ランキング
#14
- -
- -

無料トライアルで任意のサイトと比較する

始める
SidePilot VS.
SpeedyBee App

12月 19, 2024