RS-MS1I vs. SDR-Control Mobile Utilizzo e statistiche

Functional overview of the application DR functions You can use some transceiver’s DR functions. Share pictures Send and receive voice and pictures. Map See the location of repeater sites or other stations on a map using received position data, or your transceiver’s repeater list. Automatically set the transceiver’s “FROM” and “TO” fields by tapping a repeater site or a station on the map. Receive History In the DV mode, read and edit the received station’s information. Download additional information from an Internet database, such as QRZ.com or APRS.fi. Text messaging Send and receive text messages. Call Sign list Edit call signs and names used in the DR function. Also, you can add a call sign and a name in the Call Sign list. Repeater list See the detailed data entered in the Repeater list. Transceiver settings Change some of the transceiver’s function settings. Application settings Select application software settings. Import Import a Repeater list or a Call Sign list. Export Export a Repeater list, a Call Sign list, or Receive History. See the transceiver’s instruction manual for details. The instruction manual can be downloaded from the ICOM web site. Device requirements The RS-MS1I operating requirements are as follows: iOS12 or later Usable transceivers (As of Nov 2024) - ID-4100A/E + Bluetooth unit (UT-137) - ID-52A or ID-52E *1 - ID-52A PLUS or ID-52E PLUS *2 - IC-705 *3 *1 Supported in RS-MS1I Ver.1.1.0 or later. *2 Supported in RS-MS1I Ver.1.3.0 or later. *3 Supported in RS-MS1I Ver.1.2.0 or later. Preparation To use the RS-MS1I with a supported transceiver, you need an optional Bluetooth unit. See your transceiver’s instruction manual for details. Transceiver’s settings Set the following functions as shown below to use the RS-MS1I. [Function] > [CI-V] > [CI-V Transceive]: ON [Bluetooth Set] > [Data Device Set] > [Serial Port Function]: CI-V (Echo back OFF) Note: - The RS-MS1I may not work with all iPhones or iPads, even if they are one of the tested devices. This is because an application program on your device may conflict with the RS-MS1I. - The RS-MS1I may not be used, depending on the OS version, installed application, and so on. - Bluetooth LE is used for the connection with the transceiver, so there may be a time delay between the transceiver’s operation and the display on the iPhone or iPad. - When sending or receiving pictures using “FAST mode,” the headset audio will be temporarily interrupted because of the transceiver’s Bluetooth unit limitations. - You may need to connect to the Internet through a Wireless LAN, an LTE network or a 5G network for some functions. - The RS-MS1I supports only portrait orientation with the iPhone. It does not support Auto Rotate. However, landscape orientation and Auto Rotate are supported with the iPad.