- Pagina principale
- Analisi delle app
- Vibration Meter, seismograph
- Vibration Meter, seismograph Vs. Vibration analysis
- Brasile
Vibration Meter, seismograph vs. Vibration analysis Utilizzo e statistiche
Vibration meter is an app called seismograph or seismometer, which measures the strength of vibration, quakes, earthquakes, vibrations of the human body or any other objects around you.
Our app allows for detecting and recording of seismic waves generated by earthquakes, volcanic eruptions, avalanches and other sources of vibration and shocks.
Accelerometer in your mobile phone is used for detection of vibrations and measurement analysis.
Graph presents a record of the ground motion at a measuring point. Ground movement or an object is presented as a function of time in the three Cartesian axes, with the z axis perpendicular to the Earth's surface and the x- and y- axes parallel to the surface.
Mercalli intensity scale is a seismic scale used for measuring the intensity of an earthquake. It measures the effects of an earthquake and it is distinct from the moment of magnitude.
Richter Scale assigns a magnitude number to quantify the energy released by an earthquake. Peak Ground Acceleration (PGA) is equal to the maximum ground acceleration that occurred during earthquake shaking at location. PGA is equal to the amplitude of the largest absolute acceleration recorded on an accelerogram at a site during a particular earthquake.
In this app we use Instrumental Intensity Scale (developed by The United States Geological Survey) which maps peak ground acceleration and peak ground velocity on an intensity scale similar to the felt Mercalli Scale. These values are used to create shake maps by seismologists on around the world.
Mercalli Intensity Scale distinguishes the following levels of vibration and impact damage:
I. Instrumental - Not felt. Recorded by seismographs.
II. Weak - Felt only on top floors of high buildings.
III. Slight - Felt indoors, like a passing light truck.
IV. Moderate - Windows, doors rattle. Like passing train.
V. Rather Strong - Felt by all. Small objects upset.
VI. Strong - Books off shelves. Trees shake. Damage.
VII. Very Strong - Difficult to stand. Buildings damaged.
VIII. Destructive - Significant damage. Trees broken.
IX. Violent - General panic. Serious damage. Cracks.
X. Intense - Most buildings destroyed. Rails bent.
XI. Extreme - Rails bent greatly. Pipelines destroyed.
XII. Catastrophic - Near total damage.
This app allows you monitor and share the results of your measurements with other users.
Measure and monitor all vibration and shocks using smartphone or tablet!
- App Store di Apple
- Gratis
- Servizi
Classifica degli store
- -
The application analyzes the data from the phone's accelerometer and builds a vibration spectrum. This allows the evaluation of not only the strength and frequency of the vibration, but also the speed of rotation of various mechanisms: fans, motors, various rotating components; since the vibration frequency often (but not always) coincides with the frequency of rotation. The application will be useful in determining the quality of fans and motors, in determining whether their actual parameters coincide with the ones declared by the manufacturer, it will find its uses in monitoring of malfunctions (e.g. in bearings) or while testing the quality of assembly and balancing of the homemade mechanisms with rotating parts.
Do not expose your iPhone to an excessive vibration, as it may break. If the analyzed vibration is too strong, use a foam material pad, or put your iPhone at a distance where the force of the vibration is not dangerous to your device. In addition to decreasing vibration for the iPhone, a foam pad improves contact between the iPhone and the vibrating part, which makes the transmission of vibration more accurate and produces better results.
BE SURE TO READ THE EXAMPLES OF THE VIBRATION SPECTRUM ANALYSIS AT THE APPLICATION WEB SITE (usefulmobileapps.com).
Features of the full version of the application:
• The choice of units of measurement. X-axis: Hz or RPM. Y-axis: g, m/s², ft/s², mm/s, in/s (ips), mm, mil, dB(A), dB(V).
• FFT size (for built-in accelerometer): 64, 128, 256, 512, 1024, 2048, 4096 (data collection time from 0.64 sec. to 40 sec.). For an accelerometer connected to the headphone jack FFT size from 2048 to 131072. For Bluetooth-accelerometer FFT size from 512 to 32768.
• Linear and logarithmic frequency scale.
• Linear frequency scale with maximum details (there is a choice for the displayed frequency range).
• Peak frequency detection.
• Values of any point (for frequency scale and sound wave (at maximum detail)).
• Selecting which axis of the accelerometer is to collect data.
• Octave bands (1/1,1/3,1/6,1/12).
• Window functions (Blackman, Hamming, Hann (Hanning), Blackman–Nuttall, Gaussian, Flat top).
• Peak hold.
• Exponential spectrum averaging.
• Taking a screenshot by lightly touching the screen.
• Root mean square (RMS, for vibration) or average value (AVG, for absolute values) for vibration wave. Values are calculated only for data displayed on the screen.
• Calibration of the built-in accelerometer. Need EXCLUSIVELY for measuring absolute acceleration values (gravitational acceleration). To activate the settings, turn on the "Vibration wave" mode and turn off the "Only fluctuations" mode. The parameters of the accelerometer depend on the temperature and voltage of the battery, and may change over time. To obtain stable values, the accelerometer should work for several minutes.
• Saving the measurement results in the application. Files with saved data (SavedData_[date]_[time].txt) can be copied to a desktop/laptop computer or transferred to another iPhone using iTunes.
• Export data to a text ("Y=[y1 y2... yn]", "y1;y2;... yn", "x1;y1\nx2;y2;...") or WAV file. Number of points is adjusted via "FFT size". To export octaves, use "x1;y1\nx2;y2;...".
• Accelerometer connects to the headphone jack (measurement range from 5 Hz to 24000 Hz).
• A stroboscope for an external accelerometer (the feature was proposed by Todd French from Los Angeles, California).
• Bluetooth accelerometer.
When converting acceleration into speed or displacement, at 0-5 Hz frequencies noise starts prevailing over vibration peaks, which is why such frequencies are disregarded when doing the conversion. Should vibration frequency exceed 50 Hz, the peak will be recorded at an incorrect frequency, and hence speed or displacement will not be calculated correctly. Unrealistically high speed or large displacement may be a sign of this kind of false frequency.
- App Store di Apple
- Gratis
- Servizi
Classifica degli store
- -
Vibration Meter, seismographRanking a confronto con Vibration analysis
Confronta la tendenza di classifica Vibration Meter, seismograph nei ultimi 28 giorni rispetto a Vibration analysis
Rank
Nessun dato disponibile
Classifica Vibration Meter, seismograph vs. Vibration analysis per paese a confronto
Confronta la tendenza di classifica Vibration Meter, seismograph nei ultimi 28 giorni rispetto a Vibration analysis
Nessun dato da visualizzare
Fai confronti con qualsiasi sito con la nostra prova gratuita
Vibration Meter, seismograph VS.
Vibration analysis
19icembre d, 2024