- Home
- Analyse des applications
- iVibraMeter
- iVibraMeter Vs. VIBRO-LASER
iVibraMeter vs VIBRO-LASER Utilisation & Stats
iVibraMeter is a Tool for Machine Condition Monitoring. The iPad Application connects to the Data Acquisition Box and collects in real time the Overall RMS Vibration (Acceleration or Velocity), and displays the value together with the severity bar based in different industry standards.
IMPORTANT NOTE:
iVibraMeter requires external hardware for proper operation. A complete data acquisition hardware package, including an iPad, data acquisition box and external accelerometer is available, please contact us.
FEATURES:
- Real-Time Overall RMS values
- Vibration Signal Spectrum/Waveform
- Vibration in Velocity (ips or mm/s) or Acceleration (G's)
- User can select from different industrial severity standards
- User can define customized alarm and danger values
- Signal Averaging option
- Accelerometer calibration option
- Generate report with machine information, vibration levels, severity bar, map location, pictures from library or camera, signature and notes.
- email pdf report
- Help & Instructions
- Apple App Store
- Payant
- Utilitaires
Classement dans le store
- -
Quickly and easily perform precision horizontal and vertical shaft alignment with your iOS device.
Base kit:
- The 9-12-3 clock method is the basic method for taking measurements;
- Take measurements at any three positions of the shaft rotation with at least 40 degrees total rotation.;
- Measure and align vertical and flange drive machines;
- Soft-Foot check option;
- The optical averaging filter reduces the influence of external visual challenges such as lighting, steam, and other visually impairing variables while taking measurements;
- Thermal growth calculation of machines.
Advanced features:
- SMARTSPIN™. The measured values are automatically recorded during shaft rotation. With hundreds of points registered, you can start measuring at any shaft position.
- SMARTPOINTS™. This multipoint method allows you to record an unlimited number of points at any point in the shaft rotation.
- SELECT COUPLING TYPE. This option allows you to specify the coupling type used for shaft connection – i.e., short, flex, or spacer shaft.
- CARDAN/OFFSET MOUNTED MACHINES. This option is specially designed for alignment of cardan and offset mounted machines. You will need an additional Cardan bracket kit for this feature.
- MACHINE TRAIN. Enable this option and align shafts of up to five machines that are connected together.
This software is designed to work with VIBRO-LASER measuring units with firmware version 3.7.4. If the version of the measuring units is lower than the installed one, please contact distributor in your region.
- Apple App Store
- Gratuit
- Utilitaires
Classement dans le store
- -
Comparaison des classements iVibraMeter vs. VIBRO-LASER
Comparez l'évolution du classement de iVibraMeter au cours des 28 derniers jours à celle de VIBRO-LASER.
Rank
Aucune donnée disponible
Comparaison des classements iVibraMeter et VIBRO-LASER par pays
Comparez l'évolution du classement de iVibraMeter au cours des 28 derniers jours à celle de VIBRO-LASER.
Aucune donnée à afficher
Comparez avec n'importe quel site grâce à notre essai gratuit
iVibraMeter VS.
VIBRO-LASER
19écembre d, 2024