LiveLink SwarmSens vs Tuner4TRONIC Field Utilisation & Stats
LiveLink SwarmSens makes it child's play to get started with refurbishment in industrial areas such as multi-storey car parks. If the structural conditions do not permit the subsequent installation of DALI control lines, LiveLink SwarmSens is the right choice. All necessary components are already integrated in the luminaire and networking of the luminaires is simple and straightforward via Bluetooth. The high-frequency sensor integrated in the luminaire helps to save energy and only switches on the lighting when it is needed. Thanks to the intelligent networking of the luminaires, the light runs ahead intelligently and also provides orientation in the building or car park.
The LiveLink SwarmSens app enables simple and quick configuration of a SwarmSens system.
Configuration options with the app:
- Read out and check the sensor configuration.
- Activation / deactivation of the DIP switches on the sensor.
- Assignment of luminaires to luminaire groups.
- Assignment of neighbouring luminaire groups for a leading light.
- Configuration of the motion and brightness sensor.
- Configuration of the basic light function.
- Integration of radio push-button for manual control
- Apple App Store
- Gratuit
- Utilitaires
Classement dans le store
- -
The installation and maintenance of indoor and outdoor luminaires with NFC technology is as easy as it gets – thanks to the Tuner4TRONIC® Field app.
The Tuner4TRONIC® Field app can be used for programming compatible OSRAM NFC LED drivers in the Field via NFC (Near-Field Communication) – wirelessly and without mains voltage. In most cases, it is possible to readout the driver’s configuration even after the device’s failure. With the Tuner4TRONIC® Field app, certain luminaire settings can be easily adjusted according to the specific needs and within a predefined range set by the luminaire manufacturer. For indoor and outdoor applications, a typical example is the adjustment of the light output depending on the required application. Using outdoor drivers, the dimming levels can be changed in order to optimize energy savings and you can also disable the dimming functionality for special applications such as roundabouts or pedestrian crossings. In addition, using the copy and-paste function of the app, the settings of the original luminaire (indoor and outdoor) can be easily transferred to the new one in a matter of seconds making the luminaire replacement more efficient than ever before.
The following features are provided by the T4T-Field app:
- Adjust the light output in percentage, lumens and milliamperes
- Edit constant lumen output (CLO)
- Adjust the automatic dimming levels, toggle dimming on/off (outdoor drivers only)
- Enter Luminaire Info (Text, GPS, QR)
- Copy and paste configurations from one LED driver to another
- Load LED driver configurations shared by e-mails
- Show a report of an LED driver’s configuration and send it via e-mail as a CSV file
- Show a report of an LED driver’s montoring data (D4i) and send it via e-mail as a CSV file
- Open data sheet by scanning the QR code on the driver
List of supported LED drivers: https://www.tuner4tronic.com/ddstore/#/field
The user manual of this app can be downloaded as a PDF from the following link:
https://projects.inventronics-light.com/t4t/UserManuals/osram-dam-4671218_OSR_User_manual_T4T_Field_app_EN_oct2023.pdf
The tech support is available at T4Tsupport@inventronicsglobal.com
Important note: This app is part of a system and provides no functionality as a stand-alone. To be able to work with this app, you need a compatible OSRAM OT LED driver with NFC interface. Contact your local INVENTRONICS sales representative for more information.
- Apple App Store
- Gratuit
- Utilitaires
Classement dans le store
- -
LiveLink SwarmSens VS. 
Tuner4TRONIC Field19écembre d, 2024