rtl_tcp SDR vs HAM-Toolbox Uso & Estadísticas

An RTL-SDR Software Defined Radio receiver app for iOS devices. Listen to AM, FM, SSB and CW radio signals. View an RF spectrum and waterfall. Connect, via the rtl_tcp network protocol, to networked RTL-SDR USB peripherals. This app requires an external rtl_tcp server. iOS devices do not currently support the direct connection of USB peripherals such as an RTL-SDR. Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to act, essentially, as the USB port adapter for your iOS device. The rtl_tcp SDR app can also connect to hfp_tcp for the Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for the LimeSDR Mini; see GitHub for server source code. This app can also connect to a Hermes Lite 2 QRP transceiver directly, if it has a known IP address, or through an hl2_tcp server. No support is provided for installing any of the rtl_tcp or other tcp software needed to use this app (with a Raspberry Pi, or otherwise). Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent USB SDR peripheral, and have already installed and tested rtl_tcp on your Raspberry Pi, Mac, or other server. Note that this app requires a very high bandwidth network connection in order to receive streams of real-time RF samples from an RTL-SDR. It is recommended that your rtl_tcp server be on a wired connection rather than on the same WiFi as your iOS device.

App Store de Apple
Pagado
Servicios públicos

Clasificación de tiendas

- -

HAM-Toolbox

The ultimate utility App for every HAM-Radio Operator HAM-Toolbox provides a variety of useful Tools to help you operating your HAM-Radio. The Tools are ranging from activity monitoring Tools like DX-Cluster and PSK-Reporter, to Tools helping you with resource information like Bandplan, Glossar, AWG and many more Tools. HAM-Toolbox also has a built-in radio integration, so that you can directly tune to spots from the DX-Cluster and other tools. During logging, the appropriate fields for the frequency and mode will be automatically filled. With a one-time purchase you gain access to all of the following Tools on your iPhone, iPad and Mac. · TOOLS: + POTA + DX-Cluster + PSK-Reporter + Reverse Beacon Network + Call-Lookup + Locator + Beacons (especially NCDXF) + Repeater + DTMF Generator + CW Encoder and Decoder + Frequency List · LOGBOOK: HAM-Toolbox comes with a fully featured Logbook. + Inspect and edit your existing QSOs + Easy-to-use logging interface + Maintenance (Data completion from QRZ.com, Duplicates finder, Mass change) + LOTW and QRZ.com log submission + Integrated Call-Lookup with possibility to update QSO + Worked/Needed statistics for CQ-Zones, ITU-Zones and DXCCs + Map with worked grid locators representation + iCloud-Sync with multiple devices (compatible with SDR-Control and SmartSDR) · CALCULATIONS: + Ohm's law + VSWR + Dipole-Antenna + Groundplane-Antenna + HB9CV-Antenna + Helix-Antenna + dB Conversion + Wavelength · RESOURCES: + Bandplan + Glossar + Morse + AWG + CTCSS-Codes + Formulas + Q-Codes + Abbreviations + Constants Find out more here: https://ham-toolbox.com Read the Manual: https://go-to.me/hamtoolbox-manual