StmDfuUsb - Stm32 flashing im Vergleich zu TXAdvance Nutzung und Statistiken

Application for updating firmware of Stm32 CPU via usb cable using USB DFU protocol. Realization of the application is based on next documents from company STMicroelectronics. 1. AN2606 STM32 microcontroller system memory boot mode 2. AN3156 USB DFU protocol used in the STM32 bootloader How to use application. PREREQUISITE You mobile device must support USB-OTG. PREPARATION 1. Connect Stm32 board with your mobile device by USB-OTG cable 2. Activate bootloader mode for Stm32. How to do this read in AN2606. In general you should set pins BOOT0 and BOOT1 in correct combination according to model of your CPU. PROGRAMMING 1. Select file with firmware you want to write. - Firmware file should be in one of following format - Intel hex - Motorola S-Record - DfuSe (STMicroelectronics DFU format) - Raw binary 2. Set writing options you need. You can select next options - Erase only necessary pages - Unset readout protection if need - Go CPU after programming 3. Press button "Load file to flash" and wait for finish of operation. Additionally next operations is available in application - Erasing - Checking flash for blank - Compare flash with file. You can select this operation via appropriated point in menu. The application is checked on next models of microcontrollers: Stm32F072 Stm32F205 Stm32F302 Stm32F401 Stm32F746 Stm32G474 Stm32L432 RESTRICTION OF USING You can make till 25 firmware uploading fully free. After you achieved this limit you can purchase one of two services 1. additional 100 uploading 2. unlimited using of application.

Google Play Store
Kostenlos
Tools

Rang speichern

- -

TXAdvance

TxAdvance is a radio frequency transmitter manager that helps you quickly get the best frequencies by scanning the RF spectrum and automatically calculating the intermodulations products of your selected frequencies. Radio frequency spectrum The RF scan is using the Software Defined Radio technology which allows quick and precise scan. Just plug a compatible* and inexpensive SDR USB dongle to your phone to start analyzing any part of the RF spectrum from 50 to 1300 MHz with a 5 kHz resolution. Transmitters coordination Make sure that all of your transmitters are free of any of intermodulation (2TX3order, 2TX5order, 2TX7order and 3TX3order). Calculation and analysis is automatic. For each transmitter, you can see its available channels with the amount of noise and the intermodulation status. You can coordinate an unlimited amount of transmitters from any brand. Auto mode TXAdvance can automatically find the best frequencies for your transmitters by analyzing the RF spectrum and avoid intermodulation products. You can also choose your frequencies manually. Live Check Turn your Android device into a Real-Time RF Analyzer. TXAdvance Scan Exchange - TASE A collaborative worldwide map of scans : anticipate your wireless transmitters coordination by downloading and importing geo-tagged and time-stamped RF spectrum scans from all over the world. Upload scans directly from TXAdvance to the TASE. Exclusions lists User can set bands of frequencies to avoid. It can be TV channels or any custom bands. Import / Export Scans and lists of transmitters can be exported and imported for back-up or sharing purposes in proprietary TXA format or CSV format for import in third-party softwares. To use TXAdvance, you will need : - an Android phone with OTG support running at least Android 6.0 - an SDR USB dongle with a RTL2832U chipset and R820T2 tuner such as the RTL-SDR blog v3 (Many other models exist) - a USB OTG cable - the free SDR driver from Martin Marinov : https://play.google.com/store/apps/details?id=marto.rtl_tcp_andro&hl=fr&gl=US TXAdvance can not be held responsible for any legal issues caused by the use of this application. You need to familiarize yourself with your local laws before using TXAdvance. *More infos on https://www.compasseur.com