intAct Battery Check im Vergleich zu LIONTRON Multi Nutzung und Statistiken
The intAct Battery Check app helps you to keep an eye on your battery together with the intAct Battery-Guard. The Battery-Guard is attached to the battery and transmits the measurement data to the app as soon as your smartphone is connected via Bluetooth. In the app, you can read the battery voltage in volts, the case temperature in degrees Celsius and the discharge state in percent (SoC). These values are also displayed in a history chart where you can select different time periods. You can also use the app to test and retrieve your battery's starting power and charging power.
The intAct Battery Check app shows you up to four devices on the dashboard at the same time, notifies you of a critical charge state or unusual starting performance. You can also export the stored data at any time. In the trip overview you can see the times your battery has been charged (corresponding to your trips).
- Apple App Store
- Kostenlos
- Versorgungseinrichtungen
Rang speichern
- -
Use the app to record up to seven of your LIONTRON LiFePO4 batteries. The connection is made via Bluetooth, i.e. your Bluetooth function on your mobile phone must be switched on. The app displays the following functions in real time:
- Voltage in volts (V)
- Current in amperes (A)
- Power in watts (W)
- Capacity and remaining capacity in ampere hours (Ah)
- Number of charging cycles
- Charging/discharging allowed
The battery transmits the information whether charging or discharging of the battery is "allowed" or "stopped" due to an error message, such as an increased temperature.
Error messages that can be displayed below the state of charge in percent are:
- Everything is OK!
- The battery is too cold!
- The battery is too hot!
- There is a disbalance in the cells. Don't worry. If you use me, I'll even it out.
- The charging voltage is too high. Please make sure your charger is not desulphating and charging below 14.4V.
- The current you are charging with is too high!
- You are trying to draw more current than I can supply.
- One cell has too low a voltage. Please charge me!
- The battery voltage is too low. Please charge me!
- Apple App Store
- Kostenlos
- Versorgungseinrichtungen
Rang speichern
- -
intAct Battery Check VS. 
LIONTRON MultiDezember 23, 2024