Kompresor im Vergleich zu JAF Model One Nutzung und Statistiken
Kompresor is a versatile and powerful, yet easy to use, compressor. With several compression algorithms under the hood, Kompresor is suitable for use on a wide variety of signals, on the mix bus, or for mastering.
For the most transparent compression, ideal for mastering, use AUTO or "AUTO A" envelopes. Use PROGRAM envelope for an easy mix bus gluing effect. If you are after the classic style compression switch to feedback configuration. Select RMS detector for a smoother compression suitable for vocals, guitars, etc.
To help you fine tune compression parameters, enable DELTA feature to monitor only the difference between the uncompressed and compressed signal. Last but not least, Kompresor has an external side chain input for those times when you need to duck one signal based on another one.
Features:
– Four types of compression Attack/Release envelopes SIMPLE, AUTO, AUTO A, and PROGRAM.
– External sidechaining (only in hosts that support external sidechaining)
– Very fast attack time - 0.01ms
– Ratio up to 30:1
– Soft knee up to 50dB width
– Feedforward and feedback configuration
– Peak and RMS detectors
– Sidechain high pass filter
– Parallel processing
– Monitoring only the difference between the uncompressed and compressed signal
– Intelligent auto makeup gain
– 4x oversampling to avoid aliasing
– Plenty of factory presets to provide a starting point
Kompresor is primarily an AUv3 effect. To use Kompresor as a plug-in, you will need an AUv3 compatible host such as Garageband, AUM, etc.
Kompresor application is there to provide a user manual and a chance to use Kompresor with the microphone input.
- Apple App Store
- Bezahlt
- Musik
Rang speichern
- -
The MODEL ONE is a selected, fine-tuned general purpose (transistor ladder model) analog modelled filter with the ability of self oscillation. The cutoff slope is approximately 24dB. It can be switched to low pass or high pass processing mode.
The Model One, like all our filter models, is a true stereo processing audio effect, which includes a special audio-rate (high frequency) modulation oscillator, that can modulate the main parameters of the filter to its extremes. The modulation oscillator is not related to the inbuilt unison oscillators, which is a complete separate, different unit.
All our models have also an inbuilt additional saturation unit for the extra bit of analog drive. This saturation unit and the oscillator section can be used without the filter module, because the filter unit can be switched to pass the incoming audio signals thru.
The available vintage warmer tube/tape saturation type for instance is an excellent choice for breathing life into any obvious digital audio material. It can be applied to entire mixes as to individual tracks and voices.
The hosting app for the Model One has special MIDI connectivity, thus parameters can be automated with realtime MIDI Controllers (See MIDI implementation chart).
The MIDI features on the audio unit depends on the fact, whether the host application will send MIDI messages to the plugin in any way with the audio processing block or not.
The audio unit can be loaded into all supporting audio unit hosts. If successfully loaded into a host, all parameter automation and preset handling will be handled by these host applications.
- Apple App Store
- Bezahlt
- Musik
Rang speichern
- -
Kompresor VS. 
JAF Model OneDezember 15, 2024