Spread Footing im Vergleich zu Piles Capacity Nutzung und Statistiken

SPREAD FOOTING is structural engineering application utilized by Civil Engineers to design and analyze foundations with Large bi-axial Loads - Moments. • Friendly User Interface. • Details Slides and generated PDF with Code reference. • Pressure at Foundation corners. • Imperial and Metric Unit Presented Details: • Effective area under Tension and Compression Zone. • Pressures are each corner and Gravity Center. • Oneway Shear, Two way Shear, Penetration Shear at Critical Sections. • Moments at Critical Sections. • Rebars Distribution in Plan and in Section. • Bar Bending Schedule.

Apple App Store
Bezahlt
Produktivität

Rang speichern

- -

Piles Capacity

Mobile Design Tool for Cast-in-Place Bored Piles Piles Capacity has a modern design which priorities speed and simplicity. Up-to-date estimation engine documented in a brief and straight-forward online reference manual ( http://www.hetge.com/PCref ) Featuring a unique soil profile builder, Touch Soil™. Visually build required soil profile with the ease and convenience like never before. Works with either Metric (mm, metres, ton, kN, kPa)or Imperial (inch, feet, psi, psf, kips) unit systems. Graphs depth vs. friction, tip and allowable bearing capacities with optional correction of tip resistance with respect to underlying strata. Prepares detailed report for bearing values of each layer with average effective stress, skin friction and tip resistance at top and bottom of layer. Uses advanced soil parameters for more precise estimation such SPT, cohesion increment with depth, diameter reduction in rock as well as partial safety factors for skin friction and tip resistance.