De-Esser AUv3 Audio Plugin im Vergleich zu ChannelStrip Nutzung und Statistiken

De-Esser is an AUv3 Compatible plugin for your favourite DAW such as Cubasis, Auria, AUM, Meteor, BM3 (does not work as a standalone app). This is actually a trio of effects all rolled into a single package which are ideally suited but not limited to voice recordings (De-Esser, a Vocal Doubler and a Noise Gate). This De-Esser is a great tool for removing sibilance from your vocals. Sibilance is the harsh over emphasising of phonetics such as 'ss', 'sh', 'ch', 'th' etc. which tend to be made worse during the recording process. This plugin has two modes of operation, 'standard' and 'multi-band' which can be used to effectively remove this kind of problem. The standard mode emulates the ducking of a volume control just like mixing engineers used to do in the good old days, but in this case uses a compressor driven by a filtered band of the input signal that contains the problematic frequencies. This is a common and effective method which has been tried and tested for many years. The multi-band mode uses a similar filtering mechanism to isolate the effected frequency band and applies a compressor to just that range in isolation. This method gives much more pleasing and natural results as it retains the overall volume level and only effects the specified frequency range. We also included a Vocal Doubler which simulates a multi-track vocal recording. It uses sophisticated techniques that eliminates the phase cancellation issues associated with layering vocals in this way. You have complete control over delay time, levels and stereo field placement. Finally this package incorporates a Noise Gate, to remove unwanted background noise from your recording. Fully configurable threshold, attack, release and dB reduction settings are available. A visual frequency display helps you quickly find and isolate the effected frequency ranges which can also be turned off to reduce CPU load. 4 different visual modes are available to help visualise issues. A siblance filter preview button lets you listen to the problematic frequencies in isolation and a limiter is available to make headroom for the vocal doubler. This is a great addition to our AUv3 plugin range which is heavily biassed towards recording of vocals.

Apple App Store
Bezahlt
Musik

Rang speichern

- -

ChannelStrip

ChannelStrip is, as its name implies, a channel strip app and AUv3 plugin. With a gate, equalizer, and compressor, ChannelStrip can provide a solid and easy-to-use channel control for your iOS mixing needs. GATE: The gate is of our own design, and very smooth. With envelope that vary from nearly instantaneous to ludicrously long, you can use it for both basic noise control and more extreme tonal shaping. EQUALIZER: Modeled on the PEV, a famous German "cartridge" equalizer, the EQ in ChannelStrip is super useful for basic tone shaping. A very smooth and forgiving general-purpose EQ. COMPRESSOR: The compressor in ChannelStrip is, at its heart, our Rough Rider model. We removed all the filtering from Rough Rider to make it cleaner, and changed the times to be more appropriate to general mixing duties. I/O: ChannelStrip has positive gain on both the input and output, to get your levels right. It also has a bit of a personality on the output stage if you drive it hard (with either or both the input and output gains). Nominally very clean, it picks up a bit of dirt with high levels just like a hardware console. Along with that, both mute (which mutes the input entirely) and bypass (which sends the inputs right to the outputs without passing the DSP stages) are available as automatable parameters. In short, ChannelStrip is a general utility mixing tool, with a bit of character and a lot of usefulness. We _strongly_ recommend you use the AUv3 version. The standalone is provided as a courtesy, but ChannelStrip is designed as an AUv3 plugin, and prefers to be hosted in a DAW or modular host like GarageBand, AUM, Cubasis, nanoStudio, etc.