NMPS Diag vs Hondata s300 dash logger-SDash Usage & Stats

If the program does not work, write to automistake@gmail.com The function of checking the adapter for operability has appeared.* Recommended Chip Adapter: PIC18F25K80 Works on Android 4.1+ devices with adapters: ELM 327 Bluetooth, Wi-Fi, USB. The program is designed to work with original ELM327 adapters. (performance with Chinese adapters is not guaranteed) The program is intended for: - NMPS 2 (kh #) with engines 4D56,4M41 - NMPS 3 (ks1 #) with 4N15 engine - Pajero IV with 4M41 engine - Delica D5 with 4N14 engine - Outlander with 4N14 engine Program features: 1. Test of the ELM327 adapter for suitability to work with the program. 2. Reading and deleting errors on the main control units. 3. Reading and deleting errors by OBD protocol. 4. Control of the current parameters of the engine. 5. Control of injector correction values. 6. Registration of ID injectors after their replacement(only via USB ELM). 7. Carrying out an injector test. 8. Learning to small injection. 9. Teaching the injection pump valve. 10. Control of fuel leaks. 11. Special. functions for automatic transmission. 12. Control of pressure and temperature in tires. 13. Registration of new tire pressure sensors. 14. Correction of the output of data on tire pressure in the program, after rearranging the wheels. 15. Calibration of the rudder position sensor. 16. Monitoring the parameters of the particulate filter (DPF). 17. Carrying out forced DPF regeneration. 18. Oil change service for engines with DPF. 19. Possibility of registration of original sensors tire pressure 20. Parameter control ABS NMPS2 In the program folder, a log is written in text format, as well as a learning log in csv format, which can be viewed using Excel in text or graphic form. UPDATE: v1.0.50 added OBDII protocol v1.0.31 changes in registration tab of TPMS sensors ID v1.0.30 add Forced regeneration DPF 4N15, 4N14 v1.0.29 add Engine oil change service v1.0.28 added a tab with the parameters of the gasoline engine 6B31 added the Exit item to the menu v1.0.27 technical update v1.0.26 added parameters for training conditions for 4N15 fixed the name of the DPF 4N15 tab v1.0.25 Added tab with the main engine parameters small injection training tab changed v1.0.24 voltage data on the mains is now taken from the engine ECU when you open the TPMS tab, pressure reading immediately begins changes in the output of the fuel level parameter in the tank v1.0.23 added ABS NMPS2 parameter control added tire pressure to the screen - fuel level in the tank v1.0.22 added ability to register original sensors tire pressure, the registration procedure is described in the Help section v1.0.21 Particle filter parameter control for 4N15 added changes in connecting to a WiFi adapter added voltage control vehicle votage (how to calibrate voltage value is described in the Help section of the program menu) v1.0.20 added the ability to register injectors IDs for NMPS2 (kh #), this function will work only with USB ELM327 adapter more advanced adapter test done warnings for calibrating the steering wheel sensor added changes in the connection to the USB adapter v1.0.19 Technical Update * v1.0.18 AT temperature output for Delica-D5 DID 4N14 v1.0.17 adapter check added added initialization of the Steering angle sensor NMPS2 (KH #) added calibration of the Steering angle sensor NMPS2 (KH #) v1.0.14 Help section added to menu v1.0.13 added reading and deleting errors air conditioner NMPS2 (KH#) added reading and deletion errors air conditioner NMPS3 (KS1#) v1.0.09 Correction range corrected for Pajero 4 4M41 added error list for ABS / ASTC block fixed error reading for the SRS Pajero 4 block fuel leakage tab translated into Russian v1.0.08 Added special features for automatic transmission NMPS3 (KS #) Added information about engine block firmware number