WPSApp Pro vs Wi-Fi Monitor Usage & Stats

WPSApp Pro is the version without ads of WPSApp, checks the security of your network using WPS protocol. This protocol allows you to connect to a WiFi network using an 8-digit pin number that usually is predefined in the router, the problem is that the pin of many routers from different companies is known or is known how to calculate it. This app uses these pins to try the connection and check if the network is vulnerable. It implements several known algorithms for pin generation and some default pins. Also calculates default key for some routers, allows you to view WiFi passwords stored on the device, scans the devices connected to your network and analyzes the quality of the WiFi channels. Use is very simple, when scanning networks around us, you will see networks with a red cross, these are "secure" networks, they have disabled the WPS protocol and default password is unknown. Those that appear with a question mark have enabled the WPS protocol, but the pin is unknown, in this case the application allows you to test the most common. Finally, those with a green tick are most likely vulnerable, have the WPS protocol enabled and the connection pin is known. It may also be that the router has WPS disabled, but the password is known, in this case it also appears in green and can be connected to the key. You just need to be a Root user to see the passwords, to connect on Android 9/10 and for some extra function. NOTICE: Not all networks are vulnerable and that the network appears as such does not guarantee 100% that it is, several companies have updated firmware of their routers to correct the fault. TRY IT ON YOUR NETWORK AND IF YOU ARE VULNERABLE... REMEDY IT. Turn off WPS and change password for a strong and personalized. I AM NOT RESPONSIBLE FOR ANY MISUSE, INTRUSION INTO FOREIGN NETWORKS IS PUNISHABLE BY LAW. From Android 6 (Marshmallow) it is necessary to grant location permissions. It is a new requirement added by Google in this version. More information in: https://developer.android.com/about/versions/marshmallow/android-6.0-changes.html#behavior-hardware-id Some Samsung models use encryption and do not show real passwords, they show a long series of hexadecimal digits. Look for information on the internet or contact me if you want to know how to decrypt them. Pin connection does not work on LG models with Android 7 (Nougat). It's a problem with LG's own software. Please understand how the application works before giving an evaluation. Send any proposal, failure or comment to wpsapp.app@gmail.com, thanks. Acknowledgments: Zhao Chunsheng, Stefan Viehböck, Justin Oberdorf, Kcdtv, Patcher, Coeman76, Craig, Wifi-Libre, Lampiweb, David Jenne, Alessandro Arias, Sinan Soytürk, Ehab HoOoba, drygdryg, Daniel Mota de Aguiar Rodrigues.

Google Play Store
Paid
Tools

Usage Rank

#666

Wi-Fi Monitor

Information about Wi-Fi connection, available networks, connected devices. For version 1.6.5 GENERAL - the information about Wi-Fi connection For getting public IP address, press on internet/earth icon NETS - the list of available Wi-Fi networks - Support filtering of results - You can open details for net for android 11+ for most routers available extra info like model, vendor (channels, country, streams, extensions in PRO) CH 2.4/5.0 - the charts for available networks by channels groupped for 2.4 or 5.0 GHz - you can switch to mode with channel width (used center freq for channel) - you can pause updating - support scaling by fingers or maximize by double tap POWER - chart with power for net at time interval DEVICES - the devices connected to your Wi-Fi network - the quick scan in subnet a.b.c.x - the deep scan in subnet a.b.x.x (android 13 and lower) - Try detect hostname, router model - Support filtering of results - You can open details * On Android 13+ with target sdk33 standard method for detect devices not available. App trying find used IP addresses, you can increase timeout by press "..." button DEVICES P2P - Uses Wi-Fi direct for scan nearby wi-fi devices with announcement like TV, printers - In menu options get vendor by mac HELP With new android releases added restrictions for work with Wi-Fi, if something doesn't work, read this help. If on your device doesn't show net list and android 6.0+, check that location permission is granted. If permission already granted, check that location turn on. Some devices with 7.0+ required it too. If on your device doesn't show net name (unknown ssid), then for your device need permission and for last android releases location turn on. If not found devices in your network, press scan (or deep scan for public network). If you on android 13, you can increase timeout by press "..." button * for android 11+ your device's MAC address blocked with target sdk30 PRO VERSION Theme - Supports all a light, dark and black theme, choose what you like. In the free version, black available 2 weeks for the test. Report in menu info center. General info, nets, devices. You can choose what include in report. You can save info to html or PDF file format and open or share by email. In free version available test for 7 days. Also supports multiple reports, you can choose previous and open it or share. Copy text by long press in menu lists. Extra info about net for android 11+ Tab services in network - Also this supports development to improve app. Requirements : - Android 4.0.3 and above Permissions : - INTERNET is required for getting info about connection. - ACCESS_WIFI_STATE is required for info about wi-fi connection. - CHANGE_WIFI_STATE is required for active nets scan. - ACCESS_COARSE_LOCATION is required for getting the list of available networks. For 6.0 and above. - ACCESS_FINE_LOCATION is required for getting the list of available networks. For 10 and above. - NEARBY_WIFI_DEVICES is required for getting the list of p2p devices. For 13 and above. - READ/WRITE EXTERNAL_STORAGE is required for report, open in browser.